Volvo ABS ECU Repair
Join my projecteers tribe - Old Volvos Never Die - They just get faster.
Visit my VPCUK garage and my YouTube channel - WobblyDave72
There was no kit when I started on my quest - I am sure the kit will be fine.
Volvo ABS ECU Repair
Join my projecteers tribe - Old Volvos Never Die - They just get faster.
Visit my VPCUK garage and my YouTube channel - WobblyDave72
The only problem is the cost! If a rich member buys a kit, im sure we can work out what we needto make them at a fraction of the cost
2 main issue is the silicone turn into the ETM - SFS performance could fab those and securing the 2 sensors & ensuring they don't pop out and make a proper seal. Cheapest method is doing what I did - cut & shut the plastic pipe.
Volvo ABS ECU Repair
Join my projecteers tribe - Old Volvos Never Die - They just get faster.
Visit my VPCUK garage and my YouTube channel - WobblyDave72
I thought that. I even bought the pipe - 1 length of 45 degree & a 180 u-bend. When my new engine was off - I looked at using this. Turn is too tight for off the shelf bends. A silicon equivalent is really the only viable alternative unless you had mandrel bending equipment. The main obstacle is the starter motor
There is an alternative route going straight down from the ETM - but it is really tight for space, particularly with a larger FMIC pushing the fan cowling backwards on mine.
Graham might be able to route that way. Heck - I'd even donate the pipework saddle my dad made if he can make it work?
Volvo ABS ECU Repair
Join my projecteers tribe - Old Volvos Never Die - They just get faster.
Visit my VPCUK garage and my YouTube channel - WobblyDave72
This is my cut & shut...
http://www.vpcuk.org/forums/attachme...0&d=1311902864
This is the saddle I had made up...
http://www.vpcuk.org/forums/attachme...2&d=1333584231
remains as yet unused.
Volvo ABS ECU Repair
Join my projecteers tribe - Old Volvos Never Die - They just get faster.
Visit my VPCUK garage and my YouTube channel - WobblyDave72
radiator fan motor mostly - its pushed further back by the fatter FMIC - and lack of time to develop it properly. I actually think your route is more sensible. Going to have another look at it this weekend. It certainly simplifies the route.
Volvo ABS ECU Repair
Join my projecteers tribe - Old Volvos Never Die - They just get faster.
Visit my VPCUK garage and my YouTube channel - WobblyDave72
Gap is too tight - what with the main loom sitting on the front of the subframe. I am happy to manage for now as I am.
Volvo ABS ECU Repair
Join my projecteers tribe - Old Volvos Never Die - They just get faster.
Visit my VPCUK garage and my YouTube channel - WobblyDave72
i could get a kit made up and get the fittings profiled or machined. would need one to copy though. be a fraction of the cost though
You'd be welcome to copy my Dad's efforts. I think it can be simplfied.
Volvo ABS ECU Repair
Join my projecteers tribe - Old Volvos Never Die - They just get faster.
Visit my VPCUK garage and my YouTube channel - WobblyDave72
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks