Join Today
Page 1 of 4 123 ... LastLast
Results 1 to 20 of 65
  1. #1
    Ghost Rider
    If I want your opinion, I'll
    ask you to fill out the
    necessary forms
    oblark's Avatar
    Join Date
    Jul 2005
    Location
    Romsey, Hampshire
    Posts
    4,481
    Thanks
    982
    Thanked 1,921 Times in 1,186 Posts

    S60R engine in a 850

    Does or has anyone fitted a S60R engine in a 850 ??

    I no the S60R engine has VVT but the 850 doesn`t so is it a case of not using the VVT ??

    1996 850 T5 AWD - Self tuned M4.4 ECU with COP`s, B5254T ( S60R internals in a 850 block ) ostrich 2.0 , VXR injectors @ 3.8 bar, K24 turbo with a 6+6 compressor wheel, 3.25" MAF, top mounted Dump Valve, RN Exhaust manifold, 3" downpipe with 200 cell cat, 2.75" Stainless exhaust, Brembo calipers, S60R brake discs, stainless RIP kit, 3" Throttle body,

  2. #2
    Senior Member
    Still more fettling needed,
    will it never end?
    stribo's Avatar
    Join Date
    Jan 2012
    Location
    Tadley
    Posts
    13,326
    Thanks
    2,620
    Thanked 4,587 Times in 3,404 Posts
    TBH if you're just going to use the bottom end, then you'd be better off with a 2.4, as the liners are thicker. Nick MRP's engine whilst he's not looking.

  3. #3
    Ghost Rider
    If I want your opinion, I'll
    ask you to fill out the
    necessary forms
    oblark's Avatar
    Join Date
    Jul 2005
    Location
    Romsey, Hampshire
    Posts
    4,481
    Thanks
    982
    Thanked 1,921 Times in 1,186 Posts
    Quote Originally Posted by stribo View Post
    TBH if you're just going to use the bottom end, then you'd be better off with a 2.4, as the liners are thicker. Nick MRP's engine whilst he's not looking.
    The 2.4 engine is the same as the 2.5 the only difference is the 2.4 has a 90mm stroke and the 2.5 has a 93.2mm stroke.

    1996 850 T5 AWD - Self tuned M4.4 ECU with COP`s, B5254T ( S60R internals in a 850 block ) ostrich 2.0 , VXR injectors @ 3.8 bar, K24 turbo with a 6+6 compressor wheel, 3.25" MAF, top mounted Dump Valve, RN Exhaust manifold, 3" downpipe with 200 cell cat, 2.75" Stainless exhaust, Brembo calipers, S60R brake discs, stainless RIP kit, 3" Throttle body,

  4. #4
    Senior Member
    Still more fettling needed,
    will it never end?
    stribo's Avatar
    Join Date
    Jan 2012
    Location
    Tadley
    Posts
    13,326
    Thanks
    2,620
    Thanked 4,587 Times in 3,404 Posts
    so why do 2.5 liners split and 2.4's don't?

  5. #5
    Ghost Rider
    If I want your opinion, I'll
    ask you to fill out the
    necessary forms
    oblark's Avatar
    Join Date
    Jul 2005
    Location
    Romsey, Hampshire
    Posts
    4,481
    Thanks
    982
    Thanked 1,921 Times in 1,186 Posts
    Quote Originally Posted by stribo View Post
    so why do 2.5 liners split and 2.4's don't?
    Good question

    1996 850 T5 AWD - Self tuned M4.4 ECU with COP`s, B5254T ( S60R internals in a 850 block ) ostrich 2.0 , VXR injectors @ 3.8 bar, K24 turbo with a 6+6 compressor wheel, 3.25" MAF, top mounted Dump Valve, RN Exhaust manifold, 3" downpipe with 200 cell cat, 2.75" Stainless exhaust, Brembo calipers, S60R brake discs, stainless RIP kit, 3" Throttle body,

  6. #6
    Senior Member
    Still more fettling needed,
    will it never end?
    stribo's Avatar
    Join Date
    Jan 2012
    Location
    Tadley
    Posts
    13,326
    Thanks
    2,620
    Thanked 4,587 Times in 3,404 Posts
    going back to the original question, you do lose some performance without VVT, as we found when ours packed up, butI suppose if you use higher lift cams, or port and polish the head, you may be able to compensate for it.

  7. #7
    Senior Member
    This user has no status
    smithy's Avatar
    Join Date
    Apr 2006
    Posts
    7,472
    Thanks
    1,752
    Thanked 1,783 Times in 1,506 Posts
    Quote Originally Posted by oblark View Post
    Good question
    Heat and I think the 2.4 has thicker sleaves too.put a bigger turbo on the 2.5 no problems .

  8. #8
    Whiny Old Git
    Aching bones :(
    claymore's Avatar
    Join Date
    Aug 2009
    Location
    Shrewsbury
    Posts
    9,069
    Thanks
    4,385
    Thanked 4,999 Times in 3,015 Posts
    I have a s60 head on my new engine with the vvt deleted, solid lifters, ported and polishes and fernier adjustable camshafts on a 2.4 s60r bottom end.
    PIC][/SIGPIC]
    aaaaaaaaaaaaaaaaaaaaaaaaa
    aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa aaaaaa

    Facebook^^^^^^^^^^^^^^^^ Old T-5 Kompressor Thread^^^^^^^^^^^^^^^ New TT-10 Kompressor Thread

  9. #9
    Senior Member
    a 19t just isn't laggy enough
    p fandango's Avatar
    Join Date
    Aug 2004
    Posts
    19,785
    Thanks
    4,216
    Thanked 5,021 Times in 4,072 Posts
    you'll need the middle front engine mount from the picture, can't remember what its off


  10. #10
    Whiny Old Git
    Aching bones :(
    claymore's Avatar
    Join Date
    Aug 2009
    Location
    Shrewsbury
    Posts
    9,069
    Thanks
    4,385
    Thanked 4,999 Times in 3,015 Posts
    Quote Originally Posted by p fandango View Post
    you'll need the middle front engine mount from the picture, can't remember what its off

    Like this

    PIC][/SIGPIC]
    aaaaaaaaaaaaaaaaaaaaaaaaa
    aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa aaaaaa

    Facebook^^^^^^^^^^^^^^^^ Old T-5 Kompressor Thread^^^^^^^^^^^^^^^ New TT-10 Kompressor Thread

  11. #11
    Ghost Rider
    If I want your opinion, I'll
    ask you to fill out the
    necessary forms
    oblark's Avatar
    Join Date
    Jul 2005
    Location
    Romsey, Hampshire
    Posts
    4,481
    Thanks
    982
    Thanked 1,921 Times in 1,186 Posts
    Quote Originally Posted by claymore View Post
    I have a s60 head on my new engine with the vvt deleted, solid lifters, ported and polishes and fernier adjustable camshafts on a 2.4 s60r bottom end.
    Why not just put a ported/polished 850 head on a S60R bottom end ??

    1996 850 T5 AWD - Self tuned M4.4 ECU with COP`s, B5254T ( S60R internals in a 850 block ) ostrich 2.0 , VXR injectors @ 3.8 bar, K24 turbo with a 6+6 compressor wheel, 3.25" MAF, top mounted Dump Valve, RN Exhaust manifold, 3" downpipe with 200 cell cat, 2.75" Stainless exhaust, Brembo calipers, S60R brake discs, stainless RIP kit, 3" Throttle body,

  12. #12
    Senior Member
    a 19t just isn't laggy enough
    p fandango's Avatar
    Join Date
    Aug 2004
    Posts
    19,785
    Thanks
    4,216
    Thanked 5,021 Times in 4,072 Posts
    i've got one somewhere, but can't remember where i put it lol

  13. #13
    Whiny Old Git
    Aching bones :(
    claymore's Avatar
    Join Date
    Aug 2009
    Location
    Shrewsbury
    Posts
    9,069
    Thanks
    4,385
    Thanked 4,999 Times in 3,015 Posts
    Quote Originally Posted by oblark View Post
    Why not just put a ported/polished 850 head on a S60R bottom end ??
    Smaller valve stems for one thing, and I assume a better flowing design as it's 10 years more modern than the 850 head.
    PIC][/SIGPIC]
    aaaaaaaaaaaaaaaaaaaaaaaaa
    aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa aaaaaa

    Facebook^^^^^^^^^^^^^^^^ Old T-5 Kompressor Thread^^^^^^^^^^^^^^^ New TT-10 Kompressor Thread

  14. #14
    Ghost Rider
    If I want your opinion, I'll
    ask you to fill out the
    necessary forms
    oblark's Avatar
    Join Date
    Jul 2005
    Location
    Romsey, Hampshire
    Posts
    4,481
    Thanks
    982
    Thanked 1,921 Times in 1,186 Posts
    I was under the impression the valves are the same size on both heads

    The only difference was the VVT.

    1996 850 T5 AWD - Self tuned M4.4 ECU with COP`s, B5254T ( S60R internals in a 850 block ) ostrich 2.0 , VXR injectors @ 3.8 bar, K24 turbo with a 6+6 compressor wheel, 3.25" MAF, top mounted Dump Valve, RN Exhaust manifold, 3" downpipe with 200 cell cat, 2.75" Stainless exhaust, Brembo calipers, S60R brake discs, stainless RIP kit, 3" Throttle body,

  15. #15
    Senior Member
    a 19t just isn't laggy enough
    p fandango's Avatar
    Join Date
    Aug 2004
    Posts
    19,785
    Thanks
    4,216
    Thanked 5,021 Times in 4,072 Posts
    Quote Originally Posted by oblark View Post
    I was under the impression the valves are the same size on both heads

    The only difference was the VVT.
    nope

  16. #16
    Ghost Rider
    If I want your opinion, I'll
    ask you to fill out the
    necessary forms
    oblark's Avatar
    Join Date
    Jul 2005
    Location
    Romsey, Hampshire
    Posts
    4,481
    Thanks
    982
    Thanked 1,921 Times in 1,186 Posts
    Quote Originally Posted by p fandango View Post
    nope
    I take it I was wrong then

    Does the s60r head have bigger valves then ??

    1996 850 T5 AWD - Self tuned M4.4 ECU with COP`s, B5254T ( S60R internals in a 850 block ) ostrich 2.0 , VXR injectors @ 3.8 bar, K24 turbo with a 6+6 compressor wheel, 3.25" MAF, top mounted Dump Valve, RN Exhaust manifold, 3" downpipe with 200 cell cat, 2.75" Stainless exhaust, Brembo calipers, S60R brake discs, stainless RIP kit, 3" Throttle body,

  17. #17
    Senior Member
    This user has no status
    smithy's Avatar
    Join Date
    Apr 2006
    Posts
    7,472
    Thanks
    1,752
    Thanked 1,783 Times in 1,506 Posts
    They have sliimar valve stems

  18. The Following User Says Thank You to smithy For This Useful Post:

    claymore (Sunday 20th January 2013)

  19. #18
    Senior Member
    This user has no status
    smithy's Avatar
    Join Date
    Apr 2006
    Posts
    7,472
    Thanks
    1,752
    Thanked 1,783 Times in 1,506 Posts
    I put s60r pistons and s60r rods in a 2435 block off a lpt block .

  20. #19
    Whiny Old Git
    Aching bones :(
    claymore's Avatar
    Join Date
    Aug 2009
    Location
    Shrewsbury
    Posts
    9,069
    Thanks
    4,385
    Thanked 4,999 Times in 3,015 Posts
    Quote Originally Posted by smithy View Post
    They have sliimar valve stems
    Which is what I said
    PIC][/SIGPIC]
    aaaaaaaaaaaaaaaaaaaaaaaaa
    aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa aaaaaa

    Facebook^^^^^^^^^^^^^^^^ Old T-5 Kompressor Thread^^^^^^^^^^^^^^^ New TT-10 Kompressor Thread

  21. The Following User Says Thank You to claymore For This Useful Post:

    smithy (Sunday 20th January 2013)

  22. #20
    Senior Member
    "i'm not a half wit, im a
    genuine half wit"
    kfc's Avatar
    Join Date
    Mar 2012
    Location
    South Shropeshire
    Posts
    402
    Thanks
    10
    Thanked 49 Times in 46 Posts
    why not use the complete engine, and a stand alone ecu? just a thought.

  23. The Following User Says Thank You to kfc For This Useful Post:

    merc85 (Sunday 20th January 2013)


 

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.
     
ipv6 ready