S60/P2 V70

Correct! This is a (common) fault with the driveshaft to wheel hub interface. Volvo describe the fault as “axle ping” – but sounds more like a dull thud, knock or clunk, The tightening and/or adding of stud lock adhesive only partly solves the problem, as eventually the dull thud, knock or clunk returns.

The XC90 driveshaft end bolts are the Volvo prescribed fix for this. The difference is the XC90 bolts have a rubber cone that essentially dampens the movement between the hub and the driveshaft.

The torque setting for these bolts is 50Nm.

This is a very simple and easy fix: You will need 2 pcs P/N 30714142 With the car on the ground remove the centre caps Remove the bolt (14mm socket) Clean off any corrosion or contamination Inert the bolt and tighten to specified torque. (No stud locking adhesive required – as already applied to the thread) Refit the cap and you are in business!


Around 36 quid from volvo dealers.


Hope this helps.