V70: HOWTO: Fix a foggy

[Mr D]

So, having seen excellent posts here (and elsewhere...but we don't talk of such things) I decided to get my phone dirty and take pictures while working on my car this weekend for two projects

• Fix a shattered fog light (driver's side)
• Fix a door restraining strap (driver's side)

Tools

• Wide flat tool (like a small paint scraper)
• Hex/star screwdriver set
• Socket set
• Pliers

Get to the foggy
Easy but not obvious, first, remove the bumper by lifting the bonnet, pushing in the little round plastic clips with a screwdriver (by the radiator)
Then, pop the trim on the bumper using the flat tool (a screwdriver will do it but you'll get stress marks/cracks on the plastic)

Now you can see the bolts, but before you remove them attack the headlight wipers - tie the hose with tape to the arm to stop it from wandering off. The hose will come off with firm twisting - if it's perished you may lose it however.

Finally remove the bolts - next, using at least 3 of your limbs, push the driver's side end of the bumper towards the back of the car, pull it out and away then slider it forwards from the car (it's all on sliders, not screwed in) - repeat on the passenger side. Head to the middle of the bumper and pull straight towards you - mind the wiper sockets and remember that the foggy cables are still attached.


Replace the foggy
Kaput foggy (you'll need the hex screwdriver)

Replaced foggy and bumper


Have a Beer