Today i decided to make up a blank off plate for the turbo... took the old one off, a bit fiddly and made a plate up in no time.
loosing the bolts down the back of the block meant 3 bolts took me 2 hours!
Shouting, begging and sore fingers later it was fitted.
Now on the test run home, im loosing boost im guessing its the gasket i made for it.... i blocked up the control line so its not that and ive checked everything else once home.
Could you guys just take a look over the picture and see where im going wrong? would be a great help! thanks in advance
I also fitted up a filter i had lying around to improve the noise
Going to use the standard box for now, until i have the materials to make something similar to wobbly's.... a little bracket in the box will do for now, needs to run right first!
Bookmarks