My remap results - HLM

[MattM]

So yesterday I popped down to see Hamish at HLM, it was a quick drive because the roads were empty so I arrived early. It wasn't long before we were getting a stock figure on the dyno. This was my first dyno so I was quite impressed by the whole thing. After we had a stock figure Hamish dropped on the first Autotech map and we did several dyno runs, then another few runs with the 2nd Autotech map. Looking at the graph it was obviously the first map was the one to go with. It was loaded back on and a last run on the dyno was done which gave us the graph. A quick test drive confirmed the car was running very well. I have to say Hamish was fantastic and very accommodating and thanks to his wife for the bacon/egg sarnie

The car drives amazing now, pulls like an absolute beast. It has definitely transformed the car which you can probably see from the graph, the gains were great.

Few pics and a video for those interested.





Video: [ame]http://www.youtube.com/watch?v=y_TQMcSgiTM[/ame]

[smithy]

So yesterday I popped down to see Hamish at HLM, it was a quick drive because the roads were empty so I arrived early. It wasn't long before we were getting a stock figure on the dyno. This was my first dyno so I was quite impressed by the whole thing. After we had a stock figure Hamish dropped on the first Autotech map and we did several dyno runs, then another few runs with the 2nd Autotech map. Looking at the graph it was obviously the first map was the one to go with. It was loaded back on and a last run on the dyno was done which gave us the graph. A quick test drive confirmed the car was running very well. I have to say Hamish was fantastic and very accommodating and thanks to his wife for the bacon/egg sarnie

The car drives amazing now, pulls like an absolute beast. It has definitely transformed the car which you can probably see from the graph, the gains were great.

Few pics and a video for those interested.





Video: http://www.youtube.com/watch?v=y_TQMcSgiTM

thats the only rolling road i use to tune my car so i can get a good comparsion between the mods but i dont get a bacon sarni though favourtism is not good hamish lol.nice results is it a 2.4 t5 with the kkk24 being a 2005 model.weldone

[MattM]

Yea it's the 2.4 t5
oh and I had to pay for the sarnie

[p fandango]

nice, good result there. Was that the £300 special?

[smithy]

Yea it's the 2.4 t5
oh and I had to pay for the sarnie

atleast you got offered lol.i bet the car goes like brown stuff off a shovel now and you have the same power results as wobbly too and his is custom mapped.

[MattM]

It is silly quick now, but in a good way.

nice, good result there. Was that the £300 special?

Yep

[smithy]

It is silly quick now, but in a good way.

you will have to take me in it 1 day never been in a 2.4 t5 before .i will be able to compare it to the 137 bhp 940 mate

[dalhousie2008]

you have some ponies!!!

[t5steve]

well done to all involved..............enjoy your newfound power

[wegal]

nice results mate... why is there no din correction on the map.... also the rpm is missing :-(

Not 100% sure it needs the din correction but every map ive ever seen has it on. Is that Crank or at the wheels ?

Its a hell of a difference when you have them mapped :-)

[smithy]

nice results mate... why is there no din correction on the map.... also the rpm is missing :-(

Not 100% sure it needs the din correction but every map ive ever seen has it on. Is that Crank or at the wheels ?

Its a hell of a difference when you have them mapped :-)

hlms dyno runs always show whp mate and clutch power underneath and i did notice that the correction hadnt be done but the difference would have about the same power results because of the weather being nice and cool.

[p fandango]

rpm is missing :-(

the rpm scale is across the bottom

[MattM]

Just been out for another drive, the roads being a bit wet lead to some interesting results. Lets just say I've never spun the wheels so much! I wonder how long these tires will last...

[t5_monkey]

That's a fat increase for just a remap.


Strut brace will dampen down some of the spin and tramp.

[MattM]

Any recommendations for a strut brace? Would be good to get the power down a bit better and not spin about :p

Can only see this one - http://www.partsforvolvosonline.com/...oducts_id=6149

[t5_monkey]

Dunno about S60 strut braces.

Good front tyres help too

[MattM]

I guess so, being a bit wet doesn't help. Yesterday wasn't a problem flooring it.

[graemewelch]

nice result. is that running standard ie inj exhaust. i spoke to hamish last yr about his stg 2 and im very tempted

[MattM]

Everything standard on my car, so the results are from the Autotech remap alone
What does a stage 2 involve and what are the expected results?

[graemewelch]

if i remember right is sports cat, exhaust bigger inj and poss fmic. am sure hamish runs a hybrid turbo to.