Hi there,
There is a guy on this site (and also on Volvoclub.org) that repairs these systems. Unfortunatly I cannot remember his name at the moment, I think it might be MARCEL. but if you ask in the I.C.E. section you might find him.
good luck,
Joe.
Last edited by silverback02; Saturday 7th April 2012 at 18:14.
Marcel from Central Services in Ipswich, I bought a replacement CD changer from him, he is Volvo's authorised centre and where dealers they send all their units.
Central Services (Ipswich)
186-188 Spring Road
Ipswich
Suffolk IP4 5NR
Telephone: 01473 725953
http://www.centralservicescaraudio.co.uk/
on his website it says - "For all satellite navigation system repairs call us on 01473 725 953"
He is a very nice guy and was keen just to help me out (admittedly I did spend £350 on a new CD changer!)
ahhhhhhhhh phase 2 ownership lol, its all electrical
jdavis (Saturday 18th August 2012)
for the sim card holder, cut a piece of card the same size as the sim card and put it under the sim card before inserting back into the slot.
the card you use needs to be just thinner than a sim card is. - this was a common problem where it does not make contact.
now : 850 2.5 auto
Ex : T4 with NOS on board
The Flying Moose (Sunday 22nd April 2012)
Little update on this...
Yesterday however before biting the bullet and buying a replacement I decided to try and old trick and to leave the laser in Isopropol alcohol overnight and let it dry during the day.
Well after a little re-assembly and re-calibration of the motor slider assembly I am pleased to announce...
She lives again!!!
Thats £200 spared
Arguing is pointless....she may not be right but she's never wrong
Tell her a remap is just having your satnav updated.....
I have (had) the same problems you had. The phone issue was solved by putting a piece of paper under the SIM card.
W.r.t. the dvd player, I have replaced the laser but still I have sometimes problems.
Could you please let me know what you did when you re-calibrated the motor slider.
I think this can help.
Thanks!!!
From what I can remember I had to adjust the small piece of metal which contacts the rotating rod which slides the laser unit along.
Ill try and hunt out the guide I used for you and post back.
Arguing is pointless....she may not be right but she's never wrong
Tell her a remap is just having your satnav updated.....
BeHappy (Monday 20th August 2012)
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks