induction kit help ???

[Shortbusdriver1969]

I want to fit a induction kit to my 1996 850, but the MAF is built into the air box lid, so if I fit this:
http://www.ebay.co.uk/itm/2608945489...84.m1438.l2649
then the induction kit do you with it will work without any problems
many thanks in adavce ;-)

[Kingsford G]

I bought one off ebay stating a good quality but only lasted for 200miles

[jayeastanglia]

maf unbolts with 2 torx screws and has a big o ring which makes it a bit tight but does come out ok

[Wobbly Dave]

- indeed with a bit of WD40, swearing & grazed knuckles

[Shortbusdriver1969]

I bought one off ebay stating a good quality but only lasted for 200miles

thats awfull mate. :-(

[Shortbusdriver1969]

maf unbolts with 2 torx screws and has a big o ring which makes it a bit tight but does come out ok

Ok but then how does the MAF fit the induction kit
one a bit like this; http://www.ebay.co.uk/itm/K-N-KN-57i...item43a58fcc45

ta

[Kingsford G]

Ok but then how does the MAF fit the induction kit
one a bit like this; http://www.ebay.co.uk/itm/K-N-KN-57i...item43a58fcc45

ta

U fit the MAF between the filter and metal pipe using a short rubber pipes and clamps.

[t5 pete]

have a look in the pic

[t5 pete]

p.s. them cheep standard induction kits wont be the same size as my filter

[Shortbusdriver1969]

my MAF sensor is built into the lid of my air box :-(

[Kingsford G]

p.s. them cheep standard induction kits wont be the same size as my filter

Y don`t u separate it wiv a flat plastic or something from the engine heat?U do know u actually loose up to 10% power I thing `cos of the heat.Easily done mate.

[jayeastanglia]

my MAF sensor is built into the lid of my air box :-(

not on a 850/v70 it isnt..
look like this once seperated..
http://www.ebay.co.uk/itm/Volvo-V70-...item3a712d3565

the right side of that ebay pic is where it fits on the air box..

and this ebay add is how a pipercross filter fits on the maf

http://www.ebay.co.uk/itm/PIPERCROSS...item3eefdd6086

or as seen on mine..see the 2 small holes on the maf thats where it fits on the air box..

[M-R-P]

The airbox lid really does pull off the maf housing, 2 torx screws and rip the round thing out of the square thing. then just put the air filter straight on the maf and let it rest on the bottom half of the airbox...

Don't waste money on the metal tube from K&n

Just because I like this pic...

[t5 pete]

Y don`t u separate it wiv a flat plastic or something from the engine heat?U do know u actually loose up to 10% power I thing `cos of the heat.Easily done mate.

Very true on a n/a car but do uou realise how hot a turbo gets no matter what filter you have the air will heat up tremendously that's why we have intercoolers some like them some don't

[jayeastanglia]

Very true on a n/a car but do uou realise how hot a turbo gets no matter what filter you have the air will heat up tremendously that's why we have intercoolers some like them some don't

I got the standard t5 fresh air pipe from the front to my cone filter(which is a K&N bought secondhand for the pricy sum of £10) and seems to be fine