here is the build pics of the rear spoiler i built for jamest5r
rear spoiler as supplied
conduit screwed on and heated to match curve of spoiler
another view of conduit and securing screws
measurements for bending conduit around spoiler
cuts made with 1mm cutting disc and hacksaw
ends bent and secured with screws
spoiler prepared for attachment of conduit with fibreglass filler
conduit attached...note ends have been added and attached
this was the messy bit but nothing a good rub with some sandpaper can't cure
after filling and priming with 2 pack primer
5 coats of basecoat later
3 coats of 2 pack laquer later
just needs final polishing but camera batteries failed
will try to post finished pics tomorrow
spoiler built over a 3 day period
sorry if some of the pics aren't 100% but i'm not david bailey
Bookmarks