Do you think actuators where out?is it very common? is there away to test the actuator to see if its dud or not?
Do you think actuators where out?is it very common? is there away to test the actuator to see if its dud or not?
I said a 10 second car not a 10 minute car
Think ive sorted it.My mate gave me a t5r turbo and i assumed the t5r actuator came with it.when i gave it beans not alot happened.So i took the actuator rod off the wastegate arm and it was level with the nipple also the nut on the arm was a little slack.So im assuming t5r actuator has been taken off my turbo and replaced with the std one.Arnt the t5r set at 11psi?i think this is set at factory 8psi.Any way ive turned it in a full revoloution and it pulls a hell of alot better now.Im gonna get my gauge on it at week end to double check what im producing.
I said a 10 second car not a 10 minute car
Good to see you've got it sorted.
Yes they do wear out, they become loose/slack and your boost could drop and/or could be inconsistant.
"The problem with internet quotes, is that you don't know if they're real or not" - Abraham Lincoln
I think, as a very basic rule of thumb, you need to pull the rod out about 4mm to hook it onto the w/g lever. (that's how I set my 16t and its lovely n pokey without the ME7 throwing a benny!
19t, greens, 3" inlet, 3" downpipe with race cat, V70R catback, autotech map...
310.2bhp / 333ft/lb
2016 Swedish Day UK "Best Modified Swede"
SOLD
Got an old discovery now.
Mine was that bad i didnt have to pull it out rofl it just slotted over so it must have been well out.I think im at about 10psi now.Its pokey enough and i will check it weekend
I said a 10 second car not a 10 minute car
If you can move it with one hand without too much effort - it's ££££ed!
19t, greens, 3" inlet, 3" downpipe with race cat, V70R catback, autotech map...
310.2bhp / 333ft/lb
2016 Swedish Day UK "Best Modified Swede"
SOLD
Got an old discovery now.
What do you mean with one hand lol i can feel the spring loaded tension.i think the actoator was messed about with,What i meant was i could take the actuator off the nipple and just slot it back over with out pulling the actuator out 4mm like martin said.
I said a 10 second car not a 10 minute car
19t, greens, 3" inlet, 3" downpipe with race cat, V70R catback, autotech map...
310.2bhp / 333ft/lb
2016 Swedish Day UK "Best Modified Swede"
SOLD
Got an old discovery now.
Can you run these to 13psi?
I said a 10 second car not a 10 minute car
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks