Hi
I'm trying to remove my ABS ECU to send to Dave850r, but someone has obviously tried before & screwed up one of the bolt heads. I tried a 4mm socket but it just spins - even tried a smaller one but to no avail. This unit on an 855 is underneath the brake thingy with pipes coming out of it, so its upside down and the bolt heads are recessed so I cant get mole grips to them - in fact there is so little room I'm wondering if I'll have to remove the whole brake thingy to get at it. I've even tried aralditing the 4mm socket to the bolt head - but that didn't work either. Anyone got any helpful ideas - except managing without ABS.
Bookmarks