Ok got a set of whites. Got bored tonight so id thought about changing the injectors in the 850 t5.

At 1st i put the injectors in the intake manifold complete with the Blue seals which suround the injectors.

I primed the rail and fuel pi**d out everywhere.

So i took the top seals off the orange injectors and put them on the white's.

I fitted the injectors into the intake then pushed the rail down on top.
(is this the correct way?) or should i put the injectors into the rail then push them into the manifold? i primed the rail and only number 4 leaked?

Obviously idealy ii'm getting new seals put should i put the injectors into the rail 1st then into the intake? or The other way round?