Brake question

[Happygilmore78]

Put different calipers, discs an Pads on the fronts, but my front right wheel is still making a shooshing sound while braking, just like it did before I changed them.

Any ideas what could cause it?

Done some heavy breaking and getting s blueing on the discs evenly it seems and a bit of smoke as I assume the oil coating burns off fully but still making the shooshing sound.

Got the backs to do next weekend, hopefully be less stubborn and looking a lot better in matt black instead of red

[t5 stealth]

back plate touching inside of the disc maybe.....
can you see any marks of touching on the calipers,
ie wheel on caliper....

[Happygilmore78]

No bud, no marks on caliper but never thought about back plate, would this cause the sound under braking?

[t5 stealth]

not usually lol,
but as things warm up anything is possible ,
have you jacked up the side that does it and spun the wheel manually,
maybe that will throw some light on it

[merc85]

as posted above Back plate would be 1st port of call, But you should really clean that grease off the new disc's 1st with brake cleaner 1st before fitment buddy.

[Happygilmore78]

Ha ha, i know - was a stupid mistake as was a bit peeved that it took hours to get one bolt off - and didnt realise until there was an apache smoke signal coming from arch.

Wheel spins freely, nothing catching - brakes seem to be even, just seems to be making this noise from the right wheel.

Will have a look at the backplate when I get a chance then and see if that is to close or bent.

[Happygilmore78]

Just thought, could it actually be the backs? sounds like the front - but know sounds travel etc when driving and havent done the backs yet.

Obviously if it goes after doing hopefully this weekend, I will know, but just wondering