Hi guys,
I need some assistance please, I have bought a V70 T5 to replace my broken 850 T5, and am just about to start transfering all the bits off one to the other, My question is about the chip,
Can I just take the chip from the 850 and put it into the V70?
If anyone has pics of the location of the chip too that would be great as it was fitted when I bought it and therefor I'm not entirely sure where or how to do so?!
Any help would be great! Thanks in advance!
Matt
Results 1 to 6 of 6
Thread: 850 T5 Chip --> V70 T5
-
Tuesday 13th September 2011, 13:03 #1Junior Member
This user has no status
- Join Date
- Oct 2008
- Location
- Notts
- Posts
- 27
- Thanks
- 6
Thanked 4 Times in 3 Posts
850 T5 Chip --> V70 T5
-
Tuesday 13th September 2011, 13:06 #2Senior Member
Gizza job!
- Join Date
- Jul 2008
- Location
- The 1980's
- Posts
- 1,068
- Thanks
- 161
Thanked 417 Times in 315 PostsNo.
Originally Posted by MattNottsT5
The 850 will be have ME4.3 engine management, the V70 will have ME4.4. They are not interchangeable.
-
Tuesday 13th September 2011, 13:11 #3Junior Member
This user has no status
- Join Date
- Oct 2008
- Location
- Notts
- Posts
- 27
- Thanks
- 6
Thanked 4 Times in 3 PostsOh damn, that might prove a problem., even though they are both p reg's? excuse my lack of knowledge in the matter but i need to make sure.
Only reason I'm asking is I've seen kits compatible for "T52 1994-1998 for 850s, V70s, C70s etc eg.
http://www.ipdusa.com/products/8559/...-c70-t5-modelsLast edited by MattNottsT5; Tuesday 13th September 2011 at 13:15.
-
Tuesday 13th September 2011, 13:19 #4Senior Member
This user has no status
- Join Date
- Mar 2005
- Location
- Dull Southampton!
- Posts
- 3,058
- Thanks
- 1,124
Thanked 1,841 Times in 1,058 PostsWhen odering that kit you would have to state which car you have, and you'd get that compatible ECU. Originally Posted by MattNottsT5
Yosser is correct you can't interchange Motronic 4.3 and 4.4 ECUs.
Factory White 855R : 2.5 Bottom End : Ported & Flowed Cylinder Head : TD04 19T TurboVXR Injectors : ME7 Manifold : TWR Throttle Body : Blackbeast IC : AEM Progressive WI : Ferrita 3" DownpipeMilltek Cat-Back : BC BR Coilovers : IPD ARB : AP Racing Brakes : M56 & Gripper LSD
-
The Following User Says Thank You to S70T5Chris For This Useful Post:
MattNottsT5 (Tuesday 13th September 2011)
-
Tuesday 13th September 2011, 13:20 #5Senior Member
Gizza job!
- Join Date
- Jul 2008
- Location
- The 1980's
- Posts
- 1,068
- Thanks
- 161
Thanked 417 Times in 315 PostsYou'll see in that kit in the link you posted that you have to call them to make sure they supply the correct bits.
I'm happy to be corrected, as I certainly don't know everything about model diffrerences, but I'm 99.9999% sure these cars will have different engine management as per my first post.
-
The Following User Says Thank You to Yosser For This Useful Post:
MattNottsT5 (Tuesday 13th September 2011)
-
Tuesday 13th September 2011, 13:23 #6Junior Member
This user has no status
- Join Date
- Oct 2008
- Location
- Notts
- Posts
- 27
- Thanks
- 6
Thanked 4 Times in 3 Postsok guys thank for your help! Very kind of you
Reply With Quote
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Bookmarks