Tuning questions.

[p fandango]

Some would say pedro is a spanner

i totally represent that comment thank you very much (or is it resent?)

Or just a nut

[LiamT4]

Liam should know LOL, he was standing right by us at the Cov meet just after Christmas whilst Adam was playing with the TT on his V70 with his laptop in the engine bay.

Your correct, i rememberd after emlyn said. lol

Sorry Liam, we have digressed a little...

No worries, used to it (i'm usually one of the main culprits! lol)

what time you planning on going there, i should be working (or pretending to work) just round the corner Friday

Not sure, anytime between 10am and 2pm.

[p fandango]

Not sure, anytime between 10am and 2pm.

let us know & i might be able to sneak out for a bit

[LiamT4]

let us know & i might be able to sneak out for a bit

I'v not got any particular time in mind (apart from between those hours), so we can meet anytime thats best for you.

[p fandango]

I'v not got any particular time in mind (apart from between those hours), so we can meet anytime thats best for you.

i'm working 7am-3.30pm so doesn't really matter to me either

[LiamT4]

Liam, buy the turbo, Ill come round and fit it for you. I have done two now and it takes about four/five hours.

As for the downpipe. You will be able to get it modified at any good exhaust dealer. As said any outlet can be swapped. All 19T's come with an angled flange and we will be able to put that straight onto your car with the existing downpipe without and hasstle, then as said get it modified and fitted by an exhaust dealer.

The Turbo-Tuner is compatible with 4.4, I have seen a demo in adams V70.

Liam if I were you this would be my shopping list.
-19T
-395 Injectors or larger
-Upgraded ATF oil cooler
-Walbro 255lph fuel pump

Coupled with a decent map you will fly.

I'd be very gratefull of any help with fitting stuff.

I'd pay you for your time mate.

[LiamT4]

i'm working 7am-3.30pm so doesn't really matter to me either

At the min, i'm aiming to be there about 11ish.

[p fandango]

At the min, i'm aiming to be there about 11ish.

plans/locations have changed everyday so far this week, but fingers crossed i'll still be free, i'll put the pollen filters in the boot before i forget lol

[The Flying Moose]

I'd be very gratefull of any help with fitting stuff.

I'd pay you for your time mate.

No need Liam, beer tokens will be fine. If you have all the items you want fitting by the time Im back from the Falklands (land in the UK on the 18th June) ill nip round and help you get it all fitted.

[LiamT4]

No need Liam, beer tokens will be fine. If you have all the items you want fitting by the time Im back from the Falklands (land in the UK on the 18th June) ill nip round and help you get it all fitted.

Main things i'm looking for at the minute are the turbo and upgrading the boost hoses, vac lines.

I'm sure i can manage a bit more than beer tokens, i'll get you a couple of "ladies of the night", being as you've been stuck on that rock for a while.

[The Flying Moose]

Main things i'm looking for at the minute are the turbo and upgrading the boost hoses, vac lines.

I'm sure i can manage a bit more than beer tokens, i'll get you a couple of "ladies of the night", being as you've been stuck on that rock for a while.

Oh dear god dont remind me Liam, im not even sure what a woman looks like anymore.

The Vac lines are easy, ill buy you some braided fuel hose and use that, it wont collapse under pressure or age anywhere near as bad as OEM replacements or silicone.

[Ed.]

Say hi to Martin for me at CCR. Angle flange turbo and downpipe flows the best

Ed

[LiamT4]

Well i went to ccr for a chat and they can do me an exhaust, but it won't be cheap.

But i think i'll be getting them to do it because after speaking to them and seeing some of there work, i'm pretty sure that i'll get exactly what i want and know that the level of quality will be 100%.

Some of the stuff there lookes excellent.

[smithy]

Well i went to ccr for a chat and they can do me an exhaust, but it won't be cheap.

But i think i'll be getting them to do it because after speaking to them and seeing some of there work, i'm pretty sure that i'll get exactly what i want and know that the level of quality will be 100%.

Some of the stuff there lookes excellent.

my 940 exhaust was built by them and getting another built soon well downpipe anyway

[LiamT4]

my 940 exhaust was built by them and getting another built soon well downpipe anyway

Think he may have mentioned something about your car. Said he done a couple of things for volvos, Ed being one and he said he'd done something for a guy in an older model who does the 1/4mile, but couldn't remember his name, may have been uou then.

Its not cheap, but they obviously know what they are doing and their "work" speaks for itself, so i'm prepared to pay a bit more.

[smithy]

Think he may have mentioned something about your car. Said he done a couple of things for volvos, Ed being one and he said he'd done something for a guy in an older model who does the 1/4mile, but couldn't remember his name, may have been uou then.

Its not cheap, but they obviously know what they are doing and their "work" speaks for itself, so i'm prepared to pay a bit more.

they make the boxes and exhausts themselves and they design exhaust systems for landrover etc.2 brothers own it

[LiamT4]

they make the boxes and exhausts themselves and they design exhaust systems for landrover etc.2 brothers own it

They do the exhaust for spyker now and he said they'd helped noble on the m600.