Blanking plate

[shrekblackR]

Hi guys with a Blanking plate for recerc do I need to remove anything or just take off old plate and replace cheers

[p fandango]

you'll need to bung up the pipe that went to the recirc valve as well, thats it

[shrekblackR]

So do I remove the recirc or just the Blanking plate of the top

[Volvostorm]

Remove the re-circ, it has 3 bolts, then fit the plate using the same bolts.

You going to be running a DV?

[shrekblackR]

Remove the re-circ, it has 3 bolts, then fit the plate using the same bolts.

You going to be running a DV?

Dont know yet mate what's best ??

[Volvostorm]

Has to be a twin-piston one,

http://cgi.ebay.co.uk/Forge-FMFK050-...item35a3dfc9b5

This is the kit I have, its gone up a bit!

[shrekblackR]

Can you run Blanking plate without dump valve ??

[p fandango]

Can you run Blanking plate without dump valve ??

oh yes

[ame]http://www.youtube.com/watch?v=fmNucK8712M[/ame]

[shrekblackR]

oh yes

http://www.youtube.com/watch?v=fmNucK8712M

Very nice man

[spesh]

I know it sounds good running a blanking plate with no dump valve bit is it really good for the turbo????

[p fandango]

I know it sounds good running a blanking plate with no dump valve bit is it really good for the turbo????

i've only heard hearsay (not the group) saying they damage them & think that theory is taken from other cars which run higher boost levels than us, quite a few members posted up saying "they've had no recirc/dump valve for ???? time with no issues" when it came up before

[JelT5]

oh yes

http://www.youtube.com/watch?v=fmNucK8712M

Video Tart

[p fandango]

Video Tart

thank you

[shrekblackR]

Blanking plate on 30 mins !!!!!! Wot a cool noise even in an auto ,, cheers guys just need to get dump valve now lol

[stevie69]

howd you do it in 30mins?thats going to be my next task..

[shrekblackR]

Just took off the air flow pipes used a small 10 mill spanner and some patience sounds fantastic hope it goes well for ya mate

[p fandango]

Blanking plate on 30 mins !!!!!! Wot a cool noise even in an auto ,, cheers guys just need to get dump valve now lol

must of took longer to bandage your hand from the graces by the sound of it lol

[JelT5]

howd you do it in 30mins?thats going to be my next task..

Use a 10mm ratchet spanner

[shrekblackR]

Use a 10mm ratchet spanner

That's the way matey

[si850r]

Blanking plate on 30 mins !!!!!! Wot a cool noise even in an auto ,, cheers guys just need to get dump valve now lol

Do a vid mate, mines an auto too...I want to hear what it sounds like...cheers