fuel pump mod

**leet5r** · Tuesday 29th March 2011, 19:34

any 1 done the fuel pump mod , av got the kit but no instructions on how to fit it etc

**Volvostorm** · Tuesday 29th March 2011, 19:38

Which mod is that?

**p fandango** · Tuesday 29th March 2011, 19:45

isn't it just a 4pole relay? original 2 pump wires to trip the relay then main wire from battery in, going to feed to pump

**leet5r** · Tuesday 29th March 2011, 19:48

am usless with wires lol , is it easy enough to fit pedro

**p fandango** · Tuesday 29th March 2011, 19:50

Originally Posted by leet5r

am usless with wires lol , is it easy enough to fit pedro

yes, but haven't got round to doing BT yet so not sure what colours you want to connect to where. I'm not sure i'm going to bother with the original pump wires & just run the relay to trip straight off the ignition

**t5 pete** · Tuesday 29th March 2011, 21:04

what the fuel pump mod supposed to do?

**p fandango** · Tuesday 29th March 2011, 21:14

Originally Posted by t5 pete

what the fuel pump mod supposed to do?

it gives a better power feed to the pump, when you look at the original wiring it is very low capacity wire

**t5 pete** · Tuesday 29th March 2011, 21:18

Originally Posted by p fandango

it gives a better power feed to the pump, when you look at the original wiring it is very low capacity wire

Is it actually need tho pedro

**Volvostorm** · Tuesday 29th March 2011, 21:20

I'm going to do mine, once I fit the Walbro

**nobananas** · Tuesday 29th March 2011, 21:26

This can be done on anything that you want to supply more current to. The coil is another good contender, I used to wire up the headlights of my cars this way too (because I was fitting illegal 150w bulbs !) you would be amazed how much current loss you get through the standard wiring. My air-con pump clutch is also wired through a relay as the existing current wasn't enough to kick in the tired clutch.

**p fandango** · Tuesday 29th March 2011, 21:27

Originally Posted by t5 pete

Is it actually need tho pedro

considering the size of the pump & the wire i'd say i'd certainly help, the wire for the pump is quite low current

**leet5r** · Wednesday 30th March 2011, 17:42

the fuel pump drops voltage once its under load and can run cars lean etc , the fuel pump mod just keeps the pump workin as it should
tim williams does a nice kit for them
cheers

**p fandango** · Wednesday 30th March 2011, 17:49

you shouldn't need a kit, its just a relay you can pick from anywhere

**leet5r** · Wednesday 30th March 2011, 17:52

but yal need a decent cable from the battety m8

**Rnash2002** · Wednesday 30th March 2011, 18:06

I looked into this when i had my 850.
I done a few runs on full boost and i only saw a .3 drop so i dont think its a must mod unless you see that theres a big enough drop from battery to pump.