850R auto to manual conversion

**WOODY T5** · Sunday 27th February 2011, 22:54

Originally Posted by volvomad

well if smithness gets back to me i will have the gearbox driveshafts and flywheel,so i will need all the other bits to do the job like gearstick and linkage and gaiter clutch slave cylinder and any other bits to do it if you can help as i do not have a donor car cheers stuart..............

pm sent .

**Dan850r** · Monday 28th February 2011, 11:43

Got all the parts off, can you pm your address and I'll get a shipping quote

**RTS70R** · Tuesday 1st March 2011, 21:30

anyone done this conversion on a phase 1 V70/S70

im stuck on the cruise control relay
anyone know where it is located on the car ?

also anyone run a auto ecu in a manual

my car seems to have a distinct pause between changes
could this be caused by ecu ?
or shall i be looking at the recirc valve

thanks in advance

**volvomad** · Tuesday 1st March 2011, 23:00

Originally Posted by Dan850r

Got all the parts off, can you pm your address and I'll get a shipping quote

what did your bigger brakes come off mate.............

**Jamest5r** · Tuesday 1st March 2011, 23:42

Originally Posted by jamest5r

Here's the guide i used, very good.

http://www.volvoforums.org.uk/showthread.php?t=71880

This is a not so good guide...

http://www.vpcuk.org/forums/showthre...project+manual

RTS70R,
Sorry cant be arsed to look through all Dooby's posts but in the first link above he does go into the cruise control and show's you how to do it, could'nt be bothered myself lol.

I ran my auto ecu for a short while but it was'nt happy, ran ok for a week or so but then decided to boost to 1.5bar all the time so got it customed mapped but i did changed alot of thing's at the time.

P.s pulled 555nm of torque on it's first run on r/r so becareful the ecu's can do funny things when there confused.

**volvomad** · Wednesday 2nd March 2011, 00:22

Originally Posted by jamest5r

RTS70R,
Sorry cant be arsed to look through all Dooby's posts but in the first link above he does go into the cruise control and show's you how to do it, could'nt be bothered myself lol.

I ran my auto ecu for a short while but it was'nt happy, ran ok for a week or so but then decided to boost to 1.5bar all the time so got it customed mapped but i did changed alot of thing's at the time.

P.s pulled 555nm of torque on it's first run on r/r so becareful the ecu's can do funny things when there confused.

how you doing can you put a manual ecu in it james cheers stuart.......