This is my cars latest upgrade, its an exhaust for the 480 Turbo that removes the rear silencer and replaces it with a simple straight through piece of 2" diametre A2 grade stainless steel. It fits straight into the place left by the previous silencer by using one of the previous hanger positions on the left side of the car ( the other right hand hanger isnt need for this ) and the inlet side for the exhaust even slides straight onto the old clamping mechanism, all i needed was a new u-clamp as typically mine broke during removal!




The sections of stainless steel are cut, welded and then polished.



Due to the lack of silencing it gives the car a much sportier noise and allows the engine to release its exhaust gasses quicker. Also being much much lighter than the original it must give a considerable weight reduction.
It took me 30mins to remove the old silencer and 20mins to fit the new one ( and i have no lifts or air tools all i used was a jack & spanners ) .Because its very easy to remove/re-fit its especially good for when the MOT comes around and it needs to be removed quickly! Its brilliant to as its pretty much the same size and exists out the same place as the old exhaust. Only with a much better exhaust note!
If you are intersted in buying one of these please contact me.
£130 inc postage.
I will soon update this thread with more pictures and videos. Thanks for looking,
Tom