280 310 remap

[stephenevans99]

PS. I notice the personal attacks are still happening on T5D5 and im still not allowed to post, despite 'Bruce's Thread' been re-opened.

So why cannot I use T5D5 with my BruceT account?

Why am I banned/Restricted?

Just my 2p....There are always 3 sides to a story - their side, your side & the truth.

Bruce....Please don't take offense, but didn't you actually ASK for your account on the 'other' forum to be closed/canceled?

Posted 06 November 2009 - 15:18 Post12

I wont be posting on here anymore and would request my account to be banned (Dont give me 'Dont post etc')

I wont be viewing, tempted to post, I merely want my Username removing the forum as I no longer wish to be part ofor have account here.

Thank you, Goodbye.

I have never condoned malicious name calling and feel that many of the personal comments aimed at you were uncalled for, my advise for you is to forget about the 'other' forum - delete the shortcut from your favorites & get on in life.

You're more than welcome on VPCUK - but in the words of Cleese "Don't mention the war (or springs)" - too much !!

Steve

[BruceT]

Just my 2p....There are always 3 sides to a story - their side, your side & the truth.

Bruce....Please don't take offense, but didn't you actually ASK for your account on the 'other' forum to be closed/canceled?

Posted 06 November 2009 - 15:18 Post12

I wont be posting on here anymore and would request my account to be banned (Dont give me 'Dont post etc')

I wont be viewing, tempted to post, I merely want my Username removing the forum as I no longer wish to be part ofor have account here.

Thank you, Goodbye.

I have never condoned malicious name calling and feel that many of the personal comments aimed at you were uncalled for, my advise for you is to forget about the 'other' forum - delete the shortcut from your favorites & get on in life.

You're more than welcome on VPCUK - but in the words of Cleese "Don't mention the war (or springs)" - too much !!

Steve

Hi Steve,

I don't think we have spoken before?

You are quite right, I did throw my toys out the pram on the 06 November 2009 - 15:18 and posted my log in details for T5D5.

I have however, asked 'Admin' on atleast 2 occasions for my BruceT to be allowed to the view forum, to no avail.

As for your advice to forget and move on, you are quite right, hence the lack of me posting in this thread.

[Al115]

I've edited the thread to remove the libelous comments - Greg, please don't post unsubstantiated allegations about any businesses on here, and definitely don't come on the forum discussing drugs. Thank you.

[RT MECHANICS]

I've edited the thread to remove the libelous comments - Greg, please don't post unsubstantiated allegations about any businesses on here, and definitely don't come on the forum discussing drugs. Thank you.

Thanks Al nice to see you have done something about it don't worry i have a copy when the time comes....

[Loadsamiles]

Does tim has public liability for injury occured at his 'premises' or work carried out? is his work gauranteed? I did not sign a disclaimer about once I left there no cover or warranties. Nor did I get a receipt for work carried out.

Who would I have gone to for potentionally

1. Damaged, probably written of motor vehicle?
2. Possible 2x Personal Injury Claims?
3. A canine injured, or possibly killed?
4. Third parties involved?
5. Damaged to Highway Property?

I work in claims in insurance,

You are poorly informed for a person who works in insurance.

I personally have public liability insurance, and it won't cover a whole load of those scenarios.

That's why I am also required to carry Professional Indemnity Insurance.

I'm surprised that working in insurance you don't even know which type of policy covers which risk.

[GregE102]

Thanks Al nice to see you have done something about it don't worry i have a copy when the time comes....

Russ

I don't care if you have got a copy signed by the Pope! And Are you threatening me or something?

And if you are? What has anything got to do with you? do you hold a personal grudge against me or something? If you do please tell me what it is?

I don't mind you saying what it is? I have nothing to hide!

I doubt you will say anything! you never do, because You lack the courage of your convictions Russ!

I will be calling you tomorrow to ask if you are threatening me Russ? and if so why?

[BruceT]

You are poorly informed for a person who works in insurance.

I personally have public liability insurance, and it won't cover a whole load of those scenarios.

That's why I am also required to carry Professional Indemnity Insurance.

I'm surprised that working in insurance you don't even know which type of policy covers which risk.

What a blast from the past.

I work in Motor Insurance, I mentioned this as I see Independent Engineers instructed for iffy circumstances which fail a 'behind the scenes' score card which can lead to the claim being passed to Indemnity and or an Independant Motor Engineer to be instructed for more information.

[hamish]

Russ

I don't care if you have got a copy signed by the Pope! And Are you threatening me or something?

And if you are? What has anything got to do with you? do you hold a personal grudge against me or something? If you do please tell me what it is?

I don't mind you saying what it is? I have nothing to hide!

I doubt you will say anything! you never do, because You lack the courage of your convictions Russ!

I will be calling you tomorrow to ask if you are threatening me Russ? and if so why?

I have read it all now.
Are you for real Greg ?

[hamish]

You are poorly informed for a person who works in insurance.

I personally have public liability insurance, and it won't cover a whole load of those scenarios.

That's why I am also required to carry Professional Indemnity Insurance.

I'm surprised that working in insurance you don't even know which type of policy covers which risk.

Has Tim got any Insurance to cover him when/if it all goes wrong ?

[GazT4R]

I think you will find this is the calmer forum, its the keyboard warriors who usuallly frequent the other forum that also argue on here.

I think you'll find the keyboard warrior Bruce started an attack on me, under the guise of 'Tim's Friend' which he wasn't prepared to have face to face, and he only lives across town and knows where I live, so that makes both forums

[p fandango]

I think you'll find the keyboard warrior Bruce started an attack on me, under the guise of 'Tim's Friend' which he wasn't prepared to have face to face, and he only lives across town and knows where I live, so that makes both forums

[Nathlm]

I think you'll find the keyboard warrior Bruce started an attack on me, under the guise of 'Tim's Friend' which he wasn't prepared to have face to face, and he only lives across town and knows where I live, so that makes both forums

" 'Tims friend' did not intially resolve the problem, despite a few attempts.

What he did suceed in was, banging my entire front left suspension leg on the ground horiztonally onto my garages concrete floor, marking the new coil spring and by doing so removing the black protective coating on there to prevent corrosion! To attempt to 'un bow' the spring. "


Absolutely priceless.......trying to straighten sprung steel by hitting it Is it on Youtube?

[Redbrick]

Absolutely priceless.......trying to straighten sprung steel by hitting it Is it on Youtube?

No but this photo of your workmanship is on the VOC gallery from way back in 2004, it's had 3627 views.....

http://www.volvogallery.org.uk/showp...hbone&cat=3040

Remember the time when you fitted Powerflex bushes to my 850? You used your big vice to push the bush out and bent the **** out of the wishbone, then tried to bend it back failed and then fitted it anyway? Don't remember? Well I do.

People in glass houses shouldn't throw stones...

[Nathlm]

No but this photo of your workmanship is on the VOC gallery from way back in 2004, it's had 3627 views.....

http://www.volvogallery.org.uk/showp...hbone&cat=3040

Remember the time when you fitted Powerflex bushes to my 850? You used your big vice to push the bush out and bent the **** out of the wishbone, then tried to bend it back failed and then fitted it anyway? Don't remember? Well I do.

People in glass houses shouldn't throw stones...

Bullsh.. Andy that was back in 2004 and this is the first time you have mentioned it to me. If you were so unhappy and you thought it was our doing why did you bring 2 more cars to us for tuning, servicing and repairs. The "big Vice" you refer to is a floor press which as any good Engineer will tell you is the correct tool for pressing out bushes. Nice try Andy find somebody else to blame.

[Turkish]

WOW what a read, from HLM remaps, to Rica remaps, to MTE remaps, to Incorrectly fitted coil springs, to does he or does he not pay tax on his extra out of hours work and does he have Insurance to work on peoples cars, to a personal slagging match and threatening behavior, to 'Tim's friend', to bashing suspension coils on the floor and now we have bent wishbones...

What ever next?

[Al115]

Yep, it's almost "the thread to end all threads"...

[GazT4R]

Coming from you thats priceless Pedro.

[JelT5]

LOL it all started with si850r's question about what do the numbers on these maps stand for.
Talk about an inflammatory question, perhaps the mods should consider a ban?

[GazT4R]

" 'Tims friend' did not intially resolve the problem, despite a few attempts.

What he did suceed in was, banging my entire front left suspension leg on the ground horiztonally onto my garages concrete floor, marking the new coil spring and by doing so removing the black protective coating on there to prevent corrosion! To attempt to 'un bow' the spring. "


Absolutely priceless.......trying to straighten sprung steel by hitting it Is it on Youtube?

Taken it straight from the HLM diagnosis and repair manual by the accounts of many customers.

[p fandango]

Coming from you thats priceless Pedro.

i can't take credit for it, i googled the pic & used the link provided. Thanks anyway tho