Guage Pod Positioning on an S60 Model..

**Storm-Troll** · Sunday 7th November 2010, 15:54

Have ordered myself a 52mm Gauge and was wondering before I order a pod etc if anyone has fitted one to the interior of an S60 model as the A Pillar on the S60 is rather wide compared to my old S70R and I doubt it will fit. so thought id get some ideas first before I order a pod either a correct fitting Pillar one or a free standing dash top mount.... any ideas welcome chaps....???

**Al115** · Sunday 7th November 2010, 16:30

Step 1. Check where the airbags are in the S60!!!

**spencem875** · Sunday 7th November 2010, 16:57

Step 2. When you figure it out let me see

**Storm-Troll** · Sunday 7th November 2010, 18:01

2001 Volvo S60
T5

Pyrotechnic Pretensioners Located On All Seatbelts

Emergency Fuel Shutoff

3 Top Tether Child Seat Anchors

Inflatable Curtain Extends Full Length Of Passenger Compartment To Provide Head Injury Protection For All Outboard Occupants

Front Driver Airbag With Dual Stage Deployment Pressure At 70 Percent or 100 Percent Depending On Severity Of Crash

Collapsible Steering Column

Rear Center 3-Point Seatbelt

Automatic Locking Retractors On All Passenger Seatbelts

Front Dual Side Impact Airbags Mounted In Seats

3-Point Seatbelts With Emergency Locking Retractors In All Seating Positions

Front Passenger Airbag With Dual Stage Deployment Pressure At 70 Percent or 100 Percent Depending On Severity Of Crash

Side Impact Protection System (SIPS) Includes Side Guard Door Beams

http://autos.yahoo.com/2001_volvo_s60_t5-features/

**Chopster** · Sunday 7th November 2010, 18:45

Windscreen pillar is free of airbags on all P2 S60's and V70's I've come across (I'd double check the top corner thought as the roof curtain bag might be quite close) and plenty of room for cabling and hose

**Al115** · Sunday 7th November 2010, 19:39

Easy to take the A-pillar trim off to check! I did on my P2 T4 and was mighty glad I did

**Storm-Troll** · Sunday 7th November 2010, 20:06

its ok guys. I have found a better less obtrusive place to fit it.. found an air vent conversion that looks smart and wont ruin the OEM look of the interior....thanks for the advice though... just got to work out how to fit the gauge and hose etc etc when it arrives. but shouldnt be too hard..

**spencem875** · Sunday 7th November 2010, 20:11

Are you still Barnet way ST?

**Storm-Troll** · Sunday 7th November 2010, 20:24

Originally Posted by spencem875

Are you still Barnet way ST?

yes mate.. and just about to shoot over to Enfield now to fill up with V Power lol

**spencem875** · Sunday 7th November 2010, 20:26

Ah right, i was in Cockfosters, i get the tube from there to go Arsenal

Had a blast with a Audi TT up a private road with a similar name to A1.

**Storm-Troll** · Sunday 7th November 2010, 20:29

Originally Posted by spencem875

Ah right, i was in Cockfosters, i get the tube from there to go Arsenal

Had a blast with a Audi TT up a private road with a similar name to A1.

your only ten mins from me.. will have to meet up sometime etc... im 2 mins from the Southmimms services. A1/M25...near the Royal Vet College out in the sticks lol

**spencem875** · Sunday 7th November 2010, 20:44

Yeh South Mimms for a coffee

**Al115** · Monday 8th November 2010, 06:52

I had the in-air-vent mount option on my old T4. I think it looked pretty good, better than having gauges splayed across the dash (as I'd done previously!)

**Storm-Troll** · Monday 8th November 2010, 11:54

thats exactly what I will be doing mate.. just got to go buy a Dremmel yet and then sit down and work out how im gonna do it.. lol... but... now I really must go.. im late.. as usual.. got to drive down to Pompey now in this gale force weather to pick up the Misses from the Island...meant to be there for 1pm.. Oops....