Join Today
Results 1 to 9 of 9

Thread: Lost Drive S60R

  1. #1
    Junior Member
    This user has no status

    Join Date
    Jul 2008
    Posts
    11
    Thanks
    1
    Thanked 4 Times in 1 Post

    Lost Drive S60R

    Got a problem that is getting worse by the day with my S60R.

    Had to change the bottom drivers side ball joint. did this however must have messed up because as soon as I tried to drive away the drive shaft inner CV joint disintergrated. Second hand drive shaft has arrived today, just fitted it no problems . . . I thought! Tried to drive it and I have no drive at all and the gearbox will not engage 6th gear!!!

    Any ideas freatfully recieved?

  2. #2
    Old Fat Git with Grey Beard
    Need to prepare to do
    Santa-ing
    Santa's Avatar
    Join Date
    May 2010
    Location
    Frimley
    Posts
    7,795
    Thanks
    1,497
    Thanked 102,999 Times in 1,826 Posts
    Not an expert but I'd say something with the gearbox internals. Believe it is usually easier to replace the gearbox.......someone will be along shortly that will know more :-)
    Any suggestions, information, complaints or grievances relating to this forum please feel free to contact us, talk to a mod or administrator

    Cars : 2009 VW Passat CC 140 CR & 2015 VW Golf R. Uploaded Albums. Past Statuses (Or is that Stati?). Past Posts.

  3. The Following User Says Thank You to Santa For This Useful Post:

    Oakes C70 T5 (Monday 25th October 2010)

  4. #3
    Senior Member
    This user has no status
    jez.w's Avatar
    Join Date
    Sep 2008
    Location
    Bedfordshire
    Posts
    371
    Thanks
    49
    Thanked 53 Times in 46 Posts
    Quote Originally Posted by Oakes C70 T5 View Post
    Got a problem that is getting worse by the day with my S60R.

    Had to change the bottom drivers side ball joint. did this however must have messed up because as soon as I tried to drive away the drive shaft inner CV joint disintergrated. Second hand drive shaft has arrived today, just fitted it no problems . . . I thought! Tried to drive it and I have no drive at all and the gearbox will not engage 6th gear!!!

    Any ideas freatfully recieved?
    How exactly did you do the ball joint, are you sure the ball joint was the problem? Ball joint shouldnt effect the drive shaft?
    Jez

    C70 2.4T Manual

  5. #4
    Junior Member
    This user has no status

    Join Date
    Jul 2008
    Posts
    11
    Thanks
    1
    Thanked 4 Times in 1 Post
    Yeah when I replaced the ball joint I took the lower section of the leg off to do it in the vice. so I could get the new one in straight. So didnt really do anything to the drive shaft other than slide it out of the hub and slide it back in. So I was amazed when it disintergrated when I tried to drive off after completeing the job. Thought that probably the joint had popped and as I let the clutch out it broke it.

    So I am really struggling to understand now why I am not getting power down the drive shafts as I clearly did when the joint broke last time I tried to drive it.

    Maybe I havent seated the shaft in the gearbox properly. didnt think that this would be possible though.

  6. #5
    Senior Member
    This user has no status

    Join Date
    Nov 2009
    Posts
    167
    Thanks
    30
    Thanked 32 Times in 24 Posts
    sounds like you have smashed the planet gears in the diff to me mate.

  7. #6
    Senior Member
    This user has no status
    jez.w's Avatar
    Join Date
    Sep 2008
    Location
    Bedfordshire
    Posts
    371
    Thanks
    49
    Thanked 53 Times in 46 Posts
    Sounds weird, did the shft get damaged when you removed it? is the new shaft exactly the same length and type as the old one side by side? Is it fitted incorrectly, might not be fully in gearbox end somehow?

    Sounds like the new shaft is not the right one.
    Jez

    C70 2.4T Manual

  8. #7
    Member
    This user has no status
    nagrom's Avatar
    Join Date
    Sep 2006
    Location
    Cornwall
    Posts
    67
    Thanks
    0
    Thanked 7 Times in 6 Posts
    Maybe talking out of my hat here, does the output from the diff/gearbox turn when you try to drive, just a thought, if the car does not have a lsd then one drive shaft faulty will probably stop all drive, I think, also are both drive shafts the same? sometimes one side is shorter than other, sorry if it sounds basic but every little helps.

  9. #8
    Senior Member
    This user has no status

    Join Date
    Mar 2010
    Posts
    592
    Thanks
    113
    Thanked 80 Times in 70 Posts
    Jack the front up and turn each wheel to see if it turns the other one. If it don't you have a box problem

  10. #9
    Senior Member
    This user has no status

    Join Date
    Mar 2005
    Location
    Stockport, Cheshire
    Posts
    210
    Thanks
    1
    Thanked 27 Times in 27 Posts
    Fingers crossed its simple fix but it sounds scary and expensive to me.


 

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.
     
ipv6 ready