i fit my boost gauge today to see what it reads before i fit my in car mbc i have an hlm chip and the gauge reads 10 psi .is this right
and regarding the mbc. 3 pipes under the bonnet do i disconnect the pipe that goes to the air intake pipe and block it or leave it on?
Results 1 to 3 of 3
Thread: boost gauge+in car mbc
-
Thursday 10th June 2010, 11:19 #1Member
This user has no status
- Join Date
- Nov 2009
- Posts
- 77
- Thanks
- 11
Thanked 7 Times in 4 Postsboost gauge+in car mbc
" border="0" />
-
Thursday 10th June 2010, 14:23 #2Senior Member
This user has no status
- Join Date
- Aug 2006
- Location
- Notts
- Posts
- 2,654
- Thanks
- 747
Thanked 508 Times in 423 PostsIf it has a remapped ecu then its running alot lower boost than it should.Leave the pipe to the air intake.
http://www.terrabear-newfoundlands.co.uk/
You always come back to what you know !!!
13.8@ 103mph fastest forum 850 in 2010 Running 286bhp(former owner)
-
Thursday 10th June 2010, 15:59 #3Member
This user has no status
- Join Date
- Nov 2009
- Posts
- 77
- Thanks
- 11
Thanked 7 Times in 4 Postsi was thinking maybe the gauge is faultly ? because the hlm made a big difference what would it have been running standard boost
Last edited by pjaystar; Thursday 10th June 2010 at 16:07.
Reply With Quote
The New Ride
The Old RideThread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Bookmarks