Damn lamba light

[brett craig]

went out for a run today and all was well, got in it to drive home and the bloody warning light came on !! car drives fine and cant find any split hoses and also cleaned the maf unit, just ordered a u380 code reader as i only have the u280

any other ideas i can do before it arrives ?

[Loadsamiles]

You could try closing the boot.

[brett craig]

code comes up as P0108, manifold/baro high input, wtf does this mean in english ?

[mds]

I had this problem with an 850R, the sensor should be on the drivers side inner wing near the washer bottle filler pink plug connector. Cleaned with contact cleaner and all OK for six months then it returned so we changed the sensor (ordered from RUFE) one plug one 10mm bolt job done no more problem.

Good Luck Dave

[brett craig]

cheers for that, i cleared the code the other night and its not returned yet, when it does i'll have a gander or replace.

[wellsy]

yeah i have had the same prob on my v70 , its the little barometric pressure sensor like mds say's.
i have cleaned mine with contact cleaner and cleared the codes and seems fine for now .
hope you get it sorted
cheers wellsy..