As I'm doing mine tomorrow- with some trepidation, I found this great step by step guide, complete with video for anyone thinking of doing it and thought it's worth sharing
PCV replacement
As I'm doing mine tomorrow- with some trepidation, I found this great step by step guide, complete with video for anyone thinking of doing it and thought it's worth sharing
PCV replacement
To be honest mate that link makes it look well hard, just take out the 4 top bolts off the mani, loosen the bottom 3 bolts they dont need to come out all the way they are all 10mm, then 2x12mm underneath one to the dipstick and one on the mani and you can then sort of lift the mani off and bend it out the way without disconnecting anything else you will need a bit of string to hold it there, everything is accessible to you then, should take you on your 1st time 3/4 hrs.
Cheers
This is the guide i 1st used http://www.lakesidedp.com/uploadpics/pcv/
Last edited by Jamest5r; Wednesday 5th May 2010 at 17:58.
T35, 556Nm/410lbft & 361BHP/317WHP
JelT5 (Wednesday 5th May 2010)
Thanks James- nice one mate
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks