right,
the ovlvo is currently boosting to 1bar an 75% of the time it holds it fine, ive adjusted the actuator rod to achive this...
the other 25% of the time it peaks to 1bar an drops to between 0.5 an 0.8 but it keeps trying to boost back up to 1bar when my foots still planted...
ive read the ecu has a boost limit at 13-14psi i think...
is it dropping because the ecu its trying to limit it? or is the boost control solonid bolted to the air box slightly foobard...?
also do they have a boost limit in 1st as it will never boost over 0.5bar in 1st...
just to note to ive relaced the pipes on the BCS with silicone ones...
am i correct in saying the the top pipe goes into the air intake
the middle one goes onto the actuator
the bottom one goes to the dv on the side of the turbo...
cheers
Bookmarks