V70 T5/D5 wheel stud pattern?

**Piles** · Wednesday 31st March 2010, 11:37

Does a V70 D5 2004 have the same wheel stud pattern as a 2001 V70 T5?

Can I transfer my replica pegs from one to the other. I pretty sure I can, if someone could confirm I'd be pleased as I'm picking up my new car next week and want to switch them.

Cheers.

**thebadger** · Wednesday 31st March 2010, 13:07

Yeah, should be fine, the offset didn't change, the hub center bore did (2008>) so they'll swap straight over.

Should still be 108x5 63.5mm

HTH

**v70torslanda** · Wednesday 31st March 2010, 22:43

Can't fit S40/V50 wheels, not sure about new 80 but don't think so.

Focus/ST/Mondeo wheels are a total No No.

All Platform 2 wheels are the same stud PCD and centre bore. As Badge says 5x108.

Tip. If you want cheap genuine 18s find some XC90 rims cos they bolt straight on too

**thebadger** · Thursday 1st April 2010, 15:26

The S40P2/V50 have a smaller centre bore, 55mm IIRC, but the XC90 wheels do swap straight over, but do remember that they're 8J wheels & can rub like mad!

Also most of the standard fit XC90's wheels are 18", so the rubber will be <35 on the profile, so expect a bumpy ride if you do pick 18".

The new S80 wheels are the same as the new V70/S60 wheels, smaller bore again.

**v70torslanda** · Thursday 1st April 2010, 20:41

18s on P2 = 235/40x18 tyre.

Seen Nebulas removed and replaced by XC90 wheels (6 spoke). No rubbing.

J

**thebadger** · Thursday 1st April 2010, 20:55

What are they again, Nautilus?

Not the pick of the bunch, but usually cheap for 18"s.

I would say that the ride will suffer from 18's.

**RT MECHANICS** · Thursday 1st April 2010, 21:03

Originally Posted by Piles

Does a V70 D5 2004 have the same wheel stud pattern as a 2001 V70 T5?

Can I transfer my replica pegs from one to the other. I pretty sure I can, if someone could confirm I'd be pleased as I'm picking up my new car next week and want to switch them.

Cheers.

Hi Piles

Good luck with the new car

Russ