this is how fast i want mine

[woking rob]

[ame]http://www.youtube.com/watch?v=YZFEOSeVs_8&feature=related[/ame]

[Crazy_C]

I want mine that fast too!! hehee

What has been done to get it up to 1.9bar??

[t5 pete]

any thing can be done it all depends on how much money/knoledge you have most larger turbos will flow 1.9 bar easy but runing that pruessure you have to start thinking about other things

[Mck1]

I think this is the same car vs a 500 BHP Supra!

[ame]http://www.youtube.com/watch?v=0ReaHyJ0m9E[/ame]

[woking rob]

yeah if u go to his page he has got a few its gone now he has broke it for parts

[woking rob]

i have found a manifold to fit a gt30 turbo and a exturnal wastgate that is enough boost aint it?

[Crazy_C]

any thing can be done it all depends on how much money/knoledge you have most larger turbos will flow 1.9 bar easy but runing that pruessure you have to start thinking about other things

Yea, guessing built n forged parts would be required that much over stock boost levels really.

But that sure looks fun! Imagine the looks on people faces as you floor it and just disappear! LOL

[volvoturboman]

My 10v goes that fast standard!!! Its a pain in the ar*e though waking up with those cornflakes all over my face lol.

[woking rob]

yeah it happens now lol i was chassing a astra turbo and was on his ass through sone bend (lol mine is **** in bends) then there was a long strate, i though to myself thats slow i cant b assed so i backed off a little, an he saw a gap waved at me so i gave it to him he was gutted when i was going passed him alot faster than he could go lol and all iv got is a mbc set a 14psi

[woking rob]

but i wanna go for the big boys

[Rnash2002]

but i wanna go for the big boys

Lol how deep are your pockets?

[woking rob]

http://www.pumaspeed.co.uk/showdetai...?productID=674 look at this that would work wouldnt it
and my pockets aint deep lol i wants dont get lol

[t5_monkey]

http://www.pumaspeed.co.uk/showdetai...?productID=674 look at this that would work wouldnt it
and my pockets aint deep lol i wants dont get lol

No change to the Compression Ratio, or internals with that kit - or the block.

Anything over 330bhp @ The crank will split an ST block sooner or later anyway

Unless you can afford an RS block (that's £5 grand)

[t5 pete]

to get power like that your atleast talking 5-7k if doing it your self then remember you will then need better suspension/brakes/fuel/pump its not as simple as bolting a larger turbo on and off you go to most people dong this is just a dream

[Rnash2002]

http://www.pumaspeed.co.uk/showdetai...?productID=674 look at this that would work wouldnt it
and my pockets aint deep lol i wants dont get lol

I think you have to ask your self what power you would be happy with and what you can afford,i would go out or drive in a few quick volvo's and see what you think,by the way whats the most powerful car you have owned for say more than 3 months?

[woking rob]

i new i would need a propper rebuild but if a gave it a all forged steel bottom end lower cr bigger valves ported head cams and all blue printed with a wire rung block it would b fine wouldnt it?

[woking rob]

I think you have to ask your self what power you would be happy with and what you can afford,i would go out or drive in a few quick volvo's and see what you think,by the way whats the most powerful car you have owned for say more than 3 months?

230 bhp atw mk2 xr2 turbo y?

[woking rob]

and i dont have the money for this im just dreaming and seeing wots about and wot will and wont work that just looks like the same sort of set up that bloke has in that vid

[t5_monkey]

230 bhp atw mk2 xr2 turbo y?

If a 230 whp fiesta wasn't quick enough - I doubt much else will be

[Rnash2002]

230 bhp atw mk2 xr2 turbo y?

Just wanted to see what sort of power you are used to,like i said before get a map then see after a few months what you think,if your like me then you will want more power lol.
Ive done mine pritty cheap,im not at work at the minute due to a back problem so i havent got money to burn,but if you look about and do the work your self it will be cheaper than getting a garage to do it.