The other thing I forgot to say is that there is virtually no silicone hose in the system - so less elastic flex.
The other thing I forgot to say is that there is virtually no silicone hose in the system - so less elastic flex.
Volvo ABS ECU Repair
Join my projecteers tribe - Old Volvos Never Die - They just get faster.
Visit my VPCUK garage and my YouTube channel - WobblyDave72
Looks good, smart work.
Wobbly Dave (Friday 29th July 2011)
The only reason that the 90 degree pipe blew of was because I re-used a pipe that had been stretched over the top IC inlet. I knew it was a risk but trying to keep the costs down I thought it was worth a go. Hey ho. I have ordered a new 90 degree bend that should fit perfectly. Only problem is I am impatient & find it irritating to have to wait.
Volvo ABS ECU Repair
Join my projecteers tribe - Old Volvos Never Die - They just get faster.
Visit my VPCUK garage and my YouTube channel - WobblyDave72
looks good dave but is it enough to catch me lol
BSR stage 3, BSR Stainless Exhaust, Vibratechnics gearbox Mount, OZ 17" Superturismo Alloys, Bell FMIC, LED Side lights, LED interior Lights, Tinted Windows, Eibach Sports Springs, K&N Air Intake, 3" Sports Cat and Downpipe, Debadged, EST Strut Brace, EST Grille, Black Moose Stickers, Bilstein B8 Dampers, Fully Polybushed, CC3 all round, CF Wingmirrors
Release the Monkey inside of you >>> Trunk Monkey
I have fixed my little niggle. I cut the OEM vertical pipe down and paired it with the last 90 solid pipe I had with the kit.
I glued & clamped the cut pipe (as it no longer had a knurled end) - determined that it wouldn't budge.
And yes frank - I will be quicker
Also the route is now a little shorter & smoother.
Volvo ABS ECU Repair
Join my projecteers tribe - Old Volvos Never Die - They just get faster.
Visit my VPCUK garage and my YouTube channel - WobblyDave72
Yes, pedro - but over time they do get softer.
Volvo ABS ECU Repair
Join my projecteers tribe - Old Volvos Never Die - They just get faster.
Visit my VPCUK garage and my YouTube channel - WobblyDave72
Good job Dave, look's really nice, the top pipe would look the nuts if you could get it done in one whole section would finish your engine bay off perfect
T35, 556Nm/410lbft & 361BHP/317WHP
Well I asked IPD if they would sell their top pipe to me separately & they said no & wasn't about to spend $400 to just bin half the kit. However I am please with my first attempt. If anyone knows someone that could make up a pipe & still make clearance & keep it shiny & cost less than 40 quid then I am all ears.
Volvo ABS ECU Repair
Join my projecteers tribe - Old Volvos Never Die - They just get faster.
Visit my VPCUK garage and my YouTube channel - WobblyDave72
Radtec in Cannock, just take them your template/pipework and they will make it for you, as usual ask Smithy to call them for you and arrange it he know's the owner(Keith). That's where im getting mine done all in one piece so no leaks at 1.7bar
T35, 556Nm/410lbft & 361BHP/317WHP
Wobbly Dave (Friday 29th July 2011)
Can't find a better pic at the moment but you get the idea...
T35, 556Nm/410lbft & 361BHP/317WHP
Do you know how much that would be approx for the top pipe?
Lets see first if it is worth the effort.
Last edited by Wobbly Dave; Saturday 30th July 2011 at 00:00.
Volvo ABS ECU Repair
Join my projecteers tribe - Old Volvos Never Die - They just get faster.
Visit my VPCUK garage and my YouTube channel - WobblyDave72
I will stick it under my hat & wait to see if this development is worth the extra investment.
Volvo ABS ECU Repair
Join my projecteers tribe - Old Volvos Never Die - They just get faster.
Visit my VPCUK garage and my YouTube channel - WobblyDave72
Good to see you and the beast again earlier.
2004 V50 T5 SE
It was lovely to see you too - & I am loving the new V50 T5 - still I think it needs the rear spoiler to set it off proper like.
Volvo ABS ECU Repair
Join my projecteers tribe - Old Volvos Never Die - They just get faster.
Visit my VPCUK garage and my YouTube channel - WobblyDave72
TORQUE app for my Samsung Galaxy S II (running Andriod 2.1) - £2.49. Wireless bluetooth OBDII interface port jobby - 16 quid.
Being able to see real time telemetry & data log it & not have to stick in a stupid boost gauge - PRICELESS
[ame="http://www.youtube.com/watch?v=Ay-ZvTn3fLo"]Bit of a boring techie vid[/ame] - but it does show what I am getting.
ps - I just now need to modify the ODBII port itself so I can put the arm rest down. I will probably rotate it by 90 degrees so the adaptor can lie flat.
Last edited by Wobbly Dave; Sunday 31st July 2011 at 00:55.
Volvo ABS ECU Repair
Join my projecteers tribe - Old Volvos Never Die - They just get faster.
Visit my VPCUK garage and my YouTube channel - WobblyDave72
Haizum74 (Monday 1st August 2011)
My modified ETM pipe came unglued today - so I wasn't happy. Sanded it all down again - reglued & pop-rivet it! It ain't going anywhere now (I hope #gulp#).
Volvo ABS ECU Repair
Join my projecteers tribe - Old Volvos Never Die - They just get faster.
Visit my VPCUK garage and my YouTube channel - WobblyDave72
There are currently 5 users browsing this thread. (0 members and 5 guests)
Bookmarks