Silver C70 T5 - Manual - 400BHP

[Dream3r]

sorry to interrupt...on the graph max Lambda value looks to be about 0.87 or [0.87*14.7 =] 12.8:1....is that not a bit high at approx. 1.5 barg?

Which RPM range do you see that? part of the point of the post was to show how important logging is, clearly the injectors needed work at this point as it goes over rich when component protection kicks in, but you don't know without a tool like this. It's richer than Dave's though this is where I found the best torque around 0.8 ish lambda