Brake Pedal Sensor....

**Happygilmore78** · Tuesday 27th October 2009, 11:29

Keep pulling this code (p1513) and think from reading on here that thats whats affecting my cruise control intermittently.

Is this an easy fix? and cant seem to find a part for this when searching. Is it located in the footwell, or in the engine bay close to resevoir?

Cheers

Nathan

**richiemat** · Tuesday 27th October 2009, 13:34

Nathan

My brake pedal position sensor failed on mine and cruise wasnt working, i got a spare from Salvo at the time for about £11. The new sensors are quite pricey. They are fitted on the front of the brake servo (think thats the right terminology) and are held in place by a circlip so easy to replace.

http://www.vpcuk.org/forums/showthread.php?t=23392 - 'RobbieH' bought one recently.

Rich

**Happygilmore78** · Tuesday 27th October 2009, 13:40

Nice one, thanks for that

**Rufe** · Friday 30th October 2009, 10:59

Yes this lives in the brake servo as said above. For 99> C70 the part number is [9441116] but new ones are not cheap at all. Retail is around £100, even after discount you still looking at around £80. Used to be quite a common part to fail on the P2 models for a while.

If you get one 2nd hand then you need to understand there are two numbers listed, one up to including 2001 model years, then another for 2002 and on

Simon

**Happygilmore78** · Friday 30th October 2009, 12:09

Not really affecting much at the mo, since i removed code last - the benefits of having a code remover i suppose - but will be sorting it out soon - like everything tickedyboo