Struts on there way out???

[850 t5 vs 600cc]

I've replaced just about everything on the front of the car which is connected to the suspension and its still clonking. I have changed the wishbones, drop links, springs, CV joints, brake disc's & pads, checked and re-tightened all the bolts and its still clonking when driving over bumps, stop, start driving and turning. I had a look at the struts and one has a little grease/oil on the top when its jacked up and the other seems to be ok with no movement. I've looked at the anti-roll bar and it has no movement on it and was very light when the wishbones and drop links were fitted.

So, what do you think i should do now?

[cameron]

Have you tried the top mounts dave

I need mine doing as ive just replaced the wishbones for nordic ones and now everything at the bottom is tight as a ducks proverbial, the bloody top is rattling and groaning

[850 t5 vs 600cc]

Yes the top mounts have been done, forgot about that.

[cameron]

Where did you get them from dave, i need mine doing as i said before

Were they expensive, ive seen some nordic ones for about £160 all in for the 4 mounts ( 2 x lower and 2 x upper ) good price, anybody know about quality of nordic parts

[850 t5 vs 600cc]

Got them from CAS, but i can't remember how much but so far so good, seem top quality as well.

http://www.central-auto.co.uk/