rear strut bar

**Slomo** · Thursday 30th April 2009, 21:29

Any one know where I can get one for my 1999 S40 T4?

Slomo

**T4_Al** · Sunday 3rd May 2009, 10:05

Hi Slomo. Try this website:

http://www.ultraracing.com.my/Catalo...S40,V40&page=1

They list front, rear and chassis braces. Or search on ebay for a Mitsubishi Evo 3 rear brace.

**Al115** · Sunday 3rd May 2009, 10:18

Just buy one for a mitsu 3 mate.

**Shortbusdriver1969** · Sunday 3rd May 2009, 10:57

Look: http://www.partsforvolvosonline.com/

**T4FLY** · Tuesday 5th May 2009, 01:30

Yeah Mitsu 3 is prob easier to get hold of and cheaper.

Mine is from VMS.

**Enigma666** · Tuesday 5th May 2009, 10:44

Evo 3 all the way Slo....only thing is you may need to shave the rear braces as they are a tight ass fit over the rear mounts....takes a few mins with a file though and you are set, oooh and you need to cut your carpet, I just cut a slot in mine, fits really neatly

Watch out for your rear seat belt spring return things when stripping down the carpet too! catch one of those and it can spring off and then you have no rear seatbelt lol

**Slomo** · Thursday 7th May 2009, 08:33

cool. Nicely priced as well

Is there anything can put on the underneath of the car to improve the handling?

Slo

**Enigma666** · Thursday 7th May 2009, 08:54

Some company in Singapore or similar do an H-Brace....but with the roads the way they are over here, not a great idea mate, you will rip it off on a speed bump.
If you want increased handling feel and stiffness then talk to Ash (Spangoolies) about his Poly bush setup, apparently his car is now harder than the lovechild of a terminator and a predator.
Go figure lol

**-CHRIS-** · Thursday 7th May 2009, 12:47

i seem to remember that uprated anti roll bars got good feedback.. think ultra racing linked to above and whiteline both do one for our cars.

**Enigma666** · Thursday 7th May 2009, 13:00

Yeah ARB is good - Slo....might be able to sort you one out cheap

**Shortbusdriver1969** · Thursday 7th May 2009, 16:41

expensive but take a look:
http://www.partsforvolvosonline.com/...oducts_id=5931
&
http://www.partsforvolvosonline.com/...oducts_id=6132

**Al115** · Thursday 7th May 2009, 21:49

Mate I've got an underbelly brace for Phase 1 S40s - was about to stick it on eBay as it doesn't fit my Phase 2 (they were redesigned with a better cross-member) - shout if you're still looking.

**T4_Al** · Thursday 7th May 2009, 22:14

Whiteline do the rear ARB kit for the T4 which is approx £250.00. I think the stock ARB is 18mm thick and the whiteline is 20mm. Not sure if these fit phase 1 though as the only product years listed is 8/00-04