Hi all, has anyone fitted an AP Brake kit to a C70 that has 17" Canisto original factory fit alloys, if so what diameter are the AP discs 325 or 330mm and will I need wheel spacers, thanks.
Tim.
Hi all, has anyone fitted an AP Brake kit to a C70 that has 17" Canisto original factory fit alloys, if so what diameter are the AP discs 325 or 330mm and will I need wheel spacers, thanks.
Tim.
I've only ever seen 850s fitted with AP kits and they only had 17s on - However if you want a good upgrade then you could do worse than fitting Ferodo DS2500 pads (and maybe SS braided lines). Lot cheaper than buying new rotors and calipers though maybe not so much BLING
Volvo ABS ECU Repair
Join my projecteers tribe - Old Volvos Never Die - They just get faster.
Visit my VPCUK garage and my YouTube channel - WobblyDave72
One other thing - if you do go down the BBK route - make sure the kit you buy is compatible with your master brake cylinder.
Volvo ABS ECU Repair
Join my projecteers tribe - Old Volvos Never Die - They just get faster.
Visit my VPCUK garage and my YouTube channel - WobblyDave72
I currently have the AP kit on my classic S70 with canistos, discs are 330mm, no spacers required and about 5mm clearance between caliper body and inside of spokes.
Let me know your e-mail address and I can send you pics.
HTH
Bob
Thanks to all for your responses, I shall now discuss this project with Russ at RT Mechanics.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks