looking at this today, was merely going to drill and place a fitting on the hard pipe just before the throttle body, right? wrong? better way to do it?
looking at this today, was merely going to drill and place a fitting on the hard pipe just before the throttle body, right? wrong? better way to do it?
Either run a silicone pipe to the tree peice above the throttle housing there will be some spare outlets that have caps on them or either fit a T peice in the boost hose that goes to the turbo.
What he said
I've got mine plumbed into the vacuum tree on the inlet manifold. This has the advantage of telling you what pressure is after the throttle flap.
1996 Olive Green 850 AWD - Follow the Project - Forged rods, 19T, big blue injectors, 960 TB, 3.25" MAF, Ostrich, 608 binary, arduino data display, active exhaust control with Focus RS tips, 320mm front brake conversion.
1996 Nautic Blue 850 AWD - Failed its MOT, now it's a donor for the green thing.
2004 Sapphire Black S60 D5 - The new daily hack.
this thingie?
Thats the one.
1996 Olive Green 850 AWD - Follow the Project - Forged rods, 19T, big blue injectors, 960 TB, 3.25" MAF, Ostrich, 608 binary, arduino data display, active exhaust control with Focus RS tips, 320mm front brake conversion.
1996 Nautic Blue 850 AWD - Failed its MOT, now it's a donor for the green thing.
2004 Sapphire Black S60 D5 - The new daily hack.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks