fitting a k+n 57i induction kit

[james]

is is straight forward fitting this and do i have to take out vent pipe from near grille and horns , ????????

[Big Pete]

Not sure if you already have the K&N one but if not I have one of these from http://www.powertecfilters.co.uk for the Volvo 850 T-5/T-5R/R model that was on my Volvo 850R which I took off to replace with a BSR Optiflow after I purchased the car November 2008. Only replaced because I wanted the BSR one, no other reason.

I'll let you have it for £35 delivered as long as you are UK mainland, and includes the mounting bracket and bolt. I think this RRP is £95 or so.

To fit you remove the airbox and this slips right onto the air mass meter with the clip, and you leave the original plastic pipe from the front of the car to the airbox, this you can re-position so it forces air onto the filter.

Let me know if you are interested.