Hi all.
Despite my best efforts I still have an annoying vibration coming from the Pro Logic centre speaker on the dash. Has anyone out there ever removed to cover? And if so, how???
Hi all.
Despite my best efforts I still have an annoying vibration coming from the Pro Logic centre speaker on the dash. Has anyone out there ever removed to cover? And if so, how???
Meet Abby, an elegant lady... Still, very willing to go topless in public. All I gotta do is push the right buttons...
I took the cover off my speaker by taking out the air vents, but it's a p2 v70...
Should work tho!
Clips are inside the vents btw!
You think I know **** nothing! But let me tell you I know **** all!
Found a good pic of what's under the grill!
http://www.krypet.net/rti/hal.jpg
You think I know **** nothing! But let me tell you I know **** all!
Looks like I've got some exploring to do!
Meet Abby, an elegant lady... Still, very willing to go topless in public. All I gotta do is push the right buttons...
befor you take off the grill.the green connecter is not off the speaker i think it is off the back of the cd/radio need help you can call me 07771554978
Thanks fella. I'm not going to get the chance to have a tinker about with it now for a few days, what with birthday drinks an' all! I will have a crack at it when I sober up! In the meantime, any other suggestions are more than welcome!! Keep 'em comin...
Meet Abby, an elegant lady... Still, very willing to go topless in public. All I gotta do is push the right buttons...
On mine I needed to get the wire mesh off first.
It is the same as normal speakers in that there is a groove all te way round that the mesh sits in. It has tabs which make it tricky and is almost impossible to do without bending it.
Watchmakers screwdrivers helped.
Again mine is a P2
Thanks for the advice. I won't get chance to have a look at it until back end of the week but I will bare all the above in mind for when I do. I might well be back...!
Meet Abby, an elegant lady... Still, very willing to go topless in public. All I gotta do is push the right buttons...
Mine was a right cow to get off, obviously it had never been off, i thought at one point i was going to break it,
Gary
V40 2.0T Sport Lux Titanium grey,(03) 133k,standard
Yamaha R1 5VY,(06) 180bhp/165whp,100nm
REMOVE THE AIR VENT!!!!
ps, the green socket is for an RTI system, not a stereo!
I took out the centre airvent in the console & pushed the clips out from below! No broken bits!
You think I know **** nothing! But let me tell you I know **** all!
Well my centre speaker and pro logic system both had a Green connector,
V40 2.0T Sport Lux Titanium grey,(03) 133k,standard
Yamaha R1 5VY,(06) 180bhp/165whp,100nm
Siam, how many wires does one speaker need?
It is the RTI, look at the link name... it's off an RTI how to guide i've been looking at!
Thinking of going down the pop up monitor road soon!
Sadly I have bought an old screen that uses that socket & not a new one which uses an easily got aftermarket one!
Tsk!
You think I know **** nothing! But let me tell you I know **** all!
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks