Back from the depths of the old VPCUK..........
Note this is for 850s and P1 V70s
I needed to replace my tailgate dampers, but the Volvospeed how-to was crap (for lack of a better word) not enough pictures, and no detail of how to actually replace the struts, plus lots of people saying that they’ve had problems attaching the struts
So here is my how-to. It took me 20 minutes (including taking photos and dodging the rain) to do, and is so simple.
What you’ll need:
- 2 x new dampers
- Torx 25 screwdriver bit
- 12mm socket, ratchet and long extension
- A flat head screwdriver
- Someone or something to hold up your tailgate for a minute or two
That’s it, simple. Here’s a gratuitous pic of what I used…
Step1 – Remove plastic side thingys….
First gently remove the cover on the D-pillar
Now remove the torx screw behind the hook thing (whatever it is used for)
Then pull the trim as shown in the next pic sequence to loosen the side bits
The gently ease the side trim down out of the clips and completely remove the trim piece.
Repeat this process for the other side of the car, then move on to step 2
Step 2 – Remove the damper and install the new one
Ok, now you can see the dampers. Prop the tailgate fully open with something or someone. I used this inanimate object….
Or ‘mom’ as I call her!
Now undo the two bolts on the bracket holding the front of the damper to the body using 12mm socket and ratchet
And twist off the damper from the tailgate hinge by pushing it towards the window
Now separate the bracket from the damper, clip the new damper on (and if it has those clips, insert the clip and lock it around the neck of the damper)
Now clip the damper to the tailgate hinge (and insert the clip if supplied)
Bookmarks