Evening all,
With a little investigation, my non functioning (from when I bought my C70 the other week) SC-901 stereo seems to have had its speaker/amp leads spliced for a specific JVC ISO connector.
I was thinking about buying a Volvo ISO lead off ebay and reverse engineering it if you will to make it fit back to the Volvo HU although I have decided against this as its all very confusing to me.
Also upon inspecting the amp something seems amiss IMO..
Please see the pictures
http://img243.imageshack.us/img243/7485/dscn08994oj.jpg
http://img417.imageshack.us/img417/6530/dscn08981ov.jpg
The difficulty of accessing the otherside of the amp makes checking it over and seeing where that sparelead goes puts me off, I can't fathom how I would get the amp out without bending the electric aerial
Also, it would appear everything is plugged into the stero as per usual, however in reality the thick, dark transparent plastic coated wires connected to this infamous JVC ISO connector seems to go to the amp in the boot, so what are the speaker connectors in the back of my stereo connected to!?!?
Yours Confused
Nathan
(Seriously, any suggestions very much appreciated, but bear in mind I want to keep the original HU - ta)
Bookmarks