Have used hammerite on my calipers for years, never had any problems. Fresh them up every few years.
Type: Posts; User: Mr Sheen; Keyword(s):
Have used hammerite on my calipers for years, never had any problems. Fresh them up every few years.
Thanks Woz, I'll try and hunt down the connector location. It's definitely a broken wire. Sensor resistance is fine.
I've got a broken wire on the O/S front ABS sensor wiring.
I want to trace it back, does it have a connector further up in the engine bay or does it terminate
at the ABS controller connector on the...
Currently my headlights are down in their lowest position. Moving the switch has no effect on their position. Motors make no attempt to move. Adjusters can easily be move manually with a screwdriver....
Could be sharing the earth or feed if one of the tracks on the PCB was cracked.
Osram Nightbreakers, make a big difference.
Check the cam position sensor.
Mine got noisier inside around the 50-55 mph, after ditching the cat.
Probably top mounts, they split cause an annoying knocking noise.
Cheap and easy fix.
I've had two, both didn't have it.
RJM in Glenrothes, Fife are Powerflow dealers (01592 630080). Good guys to deal with.
Bit of drive from you.
T5frankie;581754
Tony...C70 T5 1999 49,876 miles
Gregor - 1995 - T5 - 64820
V70 Graham - 1998 - V70 T5 - 65766
yorkshiresxi - 1995 - T5 - 67001
Antz (my dad) - T5 - 74000
crezzy2k1 - 1996...
Should have popped in. Even to my work. Kettles always on.
Emailed a few yards about engines.
Don't know why it happened. Not changed anything on the car.
Think I've bent a rod. Engine now has loud rattling noise. Feck.
Now got to source a decent engine, don't really want to break the car.
Thanks peeps. Yeah I'm going to refit them. Plan is to clean and wax oil the inner arches before winter.
How much of a pain in the butt are the front arch liners to remove?
Drill few rivets out and a spot of wrestling?
I took the bracket that holds the mount in place off the car. Three botls if I remember, wee bit of a fiddle to get it out. Then used the vice in my workbench to press fit the bush.
Found broken earth wire from battery negative to gearbox (thick blue wire).
Not had chance to replace it, job for tomorrow.
Battery fine, if it ever stops raining, I'll check the earth's.
Yeah tried jumping it, but nothing. Got battery on charge now. Will see if it's holding charge.
Tried rocking in gear to free starter, didn't have hammer to ££££ it.
Working today, so it'll...
Got strange problem and not entirely sure what's going on with my car ('96 T5)
I think it's electrical, here's what happened.....
Drove home from work, all ok. Stopped at home, switched car...
Try here http://www.inoxbolt.co.uk/zen/
Cheers Jimmy, she's still going strong. Will get some pics up at some point.
For a few months I've been having problems with my N/S headlight dip beam. It's been flickering,
sometimes not coming on for a few minutes after headlights turned on. I went to replace the bulb ...
They make a BIG difference to the feel of the front end. I noticed a little more vibration, put top
and bottom engine mounts on mine are poly bushed.