Are you going to tell us all how he done it - any one of us might need the info one day !
Type: Posts; User: SAMXPJ; Keyword(s):
Are you going to tell us all how he done it - any one of us might need the info one day !
As the noise continues at higher revs than idle when the oil pressure is 33psi rising to 74psi at 4000rpm I would think it is not an oil pump problem. It is years since a stripped a t5 engine but is...
I have just been told that it works in the same way as a computer memory stick ie magnetic ferric rings acting as gates so it seems the main stealer rules!
Or you could open it up with an angle grinder remove the baffle and weld it up again, while your at it remove all the baffles!
Yes I know BUT WHY, what system do they use to enforce this, there needs to be some form of electrical energy within the ECU or a mechanical relay somewhere along the line. Is there an electical cell...
Does anyone know how the ECU memory works with regard to holding on the various fault lights, for example if I pull my ECU how long would it need to be out of the circuit before it lost the memory or...
Hi Gary, you have no legal obligation to accept that offer, you can fight the claim yourself or use an independent insurance assesor at no cost to yourself. Just phone and explain your intention...
You need a cable shortener, which provides a small kink in the cable, looks like a tiny U bolt with two nuts to tighten. Pretty sure there is no provision for adjustment by Volvo. By the way you must...
What year is your S70 mightywolf?
I bought a new set that were for a late V70 and they were different fit for my early S70.
Had mine done by Adam in 2004 [the 310 version] was very happy with the service and it has been spot on since. Also have found their brake pads/hoses and other bits competitively priced.
Same here!
Which Mbc did you fit?
Bought my springs from them some time back - no problems very fast delivery!
I think mightywolf is correct unless you know a very good locksmith that would cut it for you and then you need someone that could clone your transponder and place it in the key. Some years ago I was...
The listing has been removed but in past threads of members buying keys off ebay it normally costs more money in the end than going through the main stealer!
Right - think I'll get one then !
Parts for Volvo online now offering this new turbo boost valve -:
http://www.partsforvolvosonline.com/default.php?cPath=28_168
at a reasonable price.
Agree with you a panel filter is the answer but never too much oil on the gauze and that also effects the maff as well!
Got the same noise, if fact had it since I owned the car so I'll have to get down and see if that remedies it!
Do you know which kit he has installed? as they take a bit of breaking!
For what it's worth I got a different boost figure [2lb] when changing the maff for another used one. I would think that with more or less corrosion on the maff wires then the change in resistance...
It looks like it is the O ring that seals the return oil pipe from the tubo, you will find it so much easier to replace it if you can use a lift or even a pit would help, also if you know a...
When it leaks from that turbo oil return pipe on the 70series cars it usually drips onto the exhaust and causes a smell in the car. Other than that I don't know of another place it normally leaks...
10p oil seal ring but a pig of a job to fit on a t5 without a lift