Where are you getting this downpipe? I'm after one myself
Type: Posts; User: mark_eire; Keyword(s):
Where are you getting this downpipe? I'm after one myself
Well the standard intercooler is wedged between the rad and the a/c condensor. The front mounted intercooler is right at the hole in the bumper so should in theory suck in a lot more vital cold air.
Hi there
I want to upgrade my throttle body to the 960. Will the throttle body off a 2.5 960 work? Obe had the seller measure it and he says its 3 inches. Is that correct?
Thanks
Mix and match. Wasn't that difficult. Some needed to be cut but as long as you have an angle grinder and sand paper you'll be grand
From them aswell.they have a universal kit that has most of the pipes with it.
I'll do a write up and put it up when I get a chance
It's 550x 225x 64
Toyo tuning. It's a universal kit. Just make sure the intercooler isn't too big. Not much room to play with down there.
Put this on today. Wasn't as hard as I thought it would be. A lot of cutting and measuring involved. But was worth it. Pulls a lot harder. Turbo spins up quicker. Delighted with it.
...
yeah, would a boost/air leak cause it to run lean? because now that i think of it while on boost i can hear a kind of whine/whistle?
Thanks
is there anyway of doing up a wideband for cheaper than the prices of the aem and innovative ones?
Thanks
the ecu i have is mapped for a bigger turbo and bigger injectors, ill have to get a wideband controller to see what exactly is ever going on.
thanks for the help lads
Really? Hmm I might look for a different ecu in that case
Thanks lads
im running bosch or denso i think, would i be better going for standard volvo plugs?
exactly, least if its running rich you know the engine wont go pop!! i have put the standard ecu back in for now so ill get the walbro ordered, think its the mitsi evo one i need isnt it?
Hi there,
Purchased an ecu off a member on here, im running a 16t turbo with 3inch downpipe and 2.5inch the rest of the way, white injectors, drove the car with a new set of plugs for about 20...
make a codereader and get ur codes..doesnt cost anything really if you have a spare 12v led lying around.
nice commentary! haha
Might have just got a bit of water in around the fuses or something? seems to be running alright there now! Nice car! engine looks nice and clean after the powerwash! haha..i...
Compression test will help alot here, your only guessing and relying on 3rd hand information. could save you a bit of money.
That hole should be there, looks like your rear main seal is leaking!
Could that noise in the video be the belt rubbing off the cover? Hard to really tell!!
Nightmare, I changed the belt myself when i had the engine out and the tiniest little movement can jump a tooth and the timing wont be correct, there suppose to use a cam locking tool but whether...
Sounds like a good start, there are plenty of guides around here and you cant go too far wrong when you have the engine out, say goodbye to whatever social life you have tho, my girlfriend hates me...
slightly higher boost i think, 2 psi, not that much difference i would think?
no theres no cut off switch for the coolant, you sure your getting fuel? that easy start stuff is pure crap..take a plug out and leave it on the plug lead and earth it close to the engine block and...
Ahhh no abseloute nightmare!! is there not a volvo garage local to you?