Join Today

Search:

Type: Posts; User: stribo; Keyword(s):

Page 1 of 20 1 2 3 4

Search: Search took 0.07 seconds.

  1. Replies
    7
    Views
    1,677

    Could be the VVT hub, they rattle when they fail.

    Could be the VVT hub, they rattle when they fail.
  2. Replies
    8
    Views
    2,939

    As above check for boost leaks, as well as the...

    As above check for boost leaks, as well as the hoses check both intercoolers, and the small hoses that link them. When i changed our S60R intercooler, the main one was starting to bow at the bottom....
  3. Replies
    4
    Views
    3,600

    Will be following with interest.

    Will be following with interest.
  4. Replies
    175
    Views
    247,847

    I thought that the operation of hydraulic...

    I thought that the operation of hydraulic clutches made them all self adjusting.
  5. Replies
    97
    Views
    95,911

    If you own a Volvo, an IKEA family card is...

    If you own a Volvo, an IKEA family card is mandatory. :P
  6. If anything you want to stiffen the dampers, and...

    If anything you want to stiffen the dampers, and fit a softer front ARB. Control body roll with the suspension as much as possible, with an ARB as an assister. A stiff ARB will just send the shock...
  7. A front strut brace will help with steering feel,...

    A front strut brace will help with steering feel, though you don't want to go too stiff on the front end as that'll just cause more understeer, a rear strut brace will help promote lift off...
  8. An alternative would be to fit R steering lock...

    An alternative would be to fit R steering lock limiters, the downside is a dreadful steering lock.
  9. Thread: Rear Lights

    by stribo
    Replies
    7
    Views
    14,511

    I'd have thought they'd have been the same, the...

    I'd have thought they'd have been the same, the only difference there might be is in the plugs, but then you could just swap the bulb holders over.
  10. Replies
    1
    Views
    36,594

    You will need the ECU remapped, and possibly the...

    You will need the ECU remapped, and possibly the CEM teprogramming. The angle gear is the same, but the splined sleeve is different.
  11. Replies
    12
    Views
    9,477

    Mine have never twanged, how much preload have...

    Mine have never twanged, how much preload have you got?
  12. Thread: Cruise Fuse?

    by stribo
    Replies
    9
    Views
    14,168

    Non operation of cruise control is normally...

    Non operation of cruise control is normally caused by a failed clutch position sensor, although VIDA should be able to tell you exactly.
    ...
  13. Replies
    7
    Views
    2,116

    2.4 T5 has a K24 turbo instead of the 13T of the...

    2.4 T5 has a K24 turbo instead of the 13T of the LPT, also has green injectors, instead of oranges. LPT has a slightly higher compression ratio than the T5, and obviously the mapping is totally...
  14. Thread: Vida login

    by stribo
    Replies
    33
    Views
    10,767

    Mine login is "1"

    Mine login is "1"
  15. Replies
    10
    Views
    7,242

    Yes.

    Yes.
  16. Replies
    10
    Views
    7,242

    Ah right, yes that's a square one, the first link...

    Ah right, yes that's a square one, the first link was for a round one.
  17. Replies
    10
    Views
    7,242

    No, the square bush won't fit in a round hole,...

    No, the square bush won't fit in a round hole, you need this one....
  18. Replies
    12
    Views
    8,627

    Yep, you've got it. :D If you spent as...

    Yep, you've got it. :D



    If you spent as much on cameras, as you do on manifolds, you might get some decent pictures. :hilarious
  19. Replies
    12
    Views
    8,627

    You'll have to take the steering arm and bottom...

    You'll have to take the steering arm and bottom arm of the hub carrier to remove the driveshafts, as long as you reattach the hub carrier with the driveshafts out, it will roll fine. Assuming the...
  20. Replies
    7
    Views
    4,474

    There's a core plug behind the fly wheel which...

    There's a core plug behind the fly wheel which has been known to fail on the diesels, also check your rear main seal.
  21. Replies
    12
    Views
    8,627

    They are all interchangeable, I swapped a...

    They are all interchangeable, I swapped a standard T5 one for a japanifold on my pre ME7 C70 T5.
    32004
  22. Replies
    4
    Views
    2,156

    Unless it's very lightly boosted, 4 psi, then...

    Unless it's very lightly boosted, 4 psi, then you're going to need to lower the compression ratio. Also if you fit a turbo, you'll need water and oil feed and return lines for it, and an intercooler....
  23. Could be a cam sensor, needs plugging into VIDA,...

    Could be a cam sensor, needs plugging into VIDA, to get codes, as normal code reader won't pick all codes up.
  24. Thread: Gul 854 manual

    by stribo
    Replies
    17
    Views
    14,022

    :hilarious :hilarious :hilarious

    :hilarious :hilarious :hilarious
  25. No, you need to tee off the vac line that goes to...

    No, you need to tee off the vac line that goes to the inlet manifold.
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.
     
ipv6 ready