Search:

just a quick question. Iv got a set of lower alloy wishbone's with powerflex black series bushes fitted. I was just wondering if there was a reson thay changed them to steel? as having felt the...

im getting the same noise as you only when cold and when the revs drop. iv read some where the it can be the oil thermostat bolted under the crank pully when the o rings start to go. my car's been...

Ive had the same problem before. Would start and run for a second or two then die (mostly at the petrol station) it gradualy got more and more often then started to cutout while driving. I found the...

don't worry flyin B its not mine. also where about'sin glasgow did the saloon one come form? im in glasgow all the time and iv never seen it.

quick question are the fuel pumps in 850's all the same? the one in my t5r has started to fail and will only go if i give it a hit. problem is i can't find a t5 but there are a few 2.0 2.5 10 and 20...

normally i would but i need the orignal bolt holes for the c 70 brace.

basically iv got a the under chassi brace form a c70 convertable and while tring to remove the plate under the exhaust the two rear bols came half wayout and the welded nuts in the floor have broke...

did the same two week ago took the stering wheel off.

have you ever used the old diagnostic system?

you have to use socket b5 to read the fault codes. you need to read the codes till you get a...

I would go the hammer route but i have to pay for a new windscreen. I just can't believe that the standard windscreen hasent been fitted properly.

would it be posable to remove the screen without...

eversince i had the t5r is always got wet in the drives foot well every time its washed but since i lost my garage is got much worse the head lineing started getting wet so took the A piler trim off...

looks like a pace mr2 turbo intercooler.

if you need more space you can move the fan and gain about and inch or 2. . its really easy to do.

just found this company on google images. www.D-WERX.COM they have som good volvo ones in there gallery.

you could just get a socket that jut smaller than the locking nut and hammer it on to get it off or you can get a locking wheel nut remover set from halfords or most moter factors. hammering a scoket...

i still think you should use the rear wheels for the speed cause with that amount of power and waight over the rear the front will probably spend more in the air than on the road lol.

is the pickup for the speedo? why don't you use the abs sensor the fitted to the 850 hubs. i think it would be easier and tidier.

also lovin the rear end its one of those car that look different...

those wheels look amazing. what are they called?

wasn't there a recall about a heat sheld needing fitted or modified next to the tank?. im sure i read it somewhere.

iv had it in there since i did the manual conversion and i done about 20 000 miles since and iv had no problems at all. the box is still quiet and smooth and it doesn't crunch at all.

iv got 5w30 engine oil in mine. its a m56. i went to a few different places and they all told me the same.

the end tanks are plastic.

one thing i forgot.if you look in the pics the balance weight just clears the template by about 1 mm. so its real close but my metro sport was the same you could'nt get a credit card between the...

i hope this works.

http://i216.photobucket.com/albums/cc36/Delboy480/DSCF6216.jpg

http://i216.photobucket.com/albums/cc36/Delboy480/DSCF6217.jpg
...

the 330x22 disc kit fits the titan wheel without any spacers. its close but it clears the spokes buy about 5-6 mm and the diamiter buy about the same. ill get pictures as soon as i can.

at the garage where i work we had a freelander come in that was really tappety and i turned out the owneson done the head gasket and he had put the sealer for the cambox on so thick that it filled...