Search:

ive got two m56h boxes here if any good, in oswestry Shropshire.

only just seen this.....did you swap the header tank ok? the graph I posted was on a dyno local to me, before it had the 3"dp and a few other things done to it. the 309 was at hlm afterwards. but the...

ive got a spare head here if needed, cams and followers are out but there still soaked in oil in the correct order. free if you can collect it. or can get it to you some how

On my diagram the red pipe on the bcs goes to the compressor, the yellow pipe to actuator and blue to airpipe, there should be coloured dots on the bcs

Ignore the colours on that diagram above

Is this serious?

Hopefully oil pressure switch or dipstick tube! Did you change the gaskets for the oil squirter things?

Good job on getting it going, that oil leak could suck ass big time! Really hope its something minor

Got mtec dimpled and grooved on mine, went for a"spirited" 120 mile drive around north Wales today and never faded once, even on standard pads and i was very hard on the brakes. Discs dont usually...

Oil pressure sensor, sump plug?

Have you checked power at the switch tho, if there's none there hthen there won't be any at the lights

Check if any of the small hoses are split too just in case

Well my old 850 barrel was a lot smaller than the 70 one, so kept the new lock complete, the end that turns the mechanism was different to so snapped it off so it didnt foul

The bit that comes out of the barrel into the lock part in the door, ill try and get a pic lol

Won't work mate there totally different, well mine were, 96 850 and changed to 98 s70, in the end i snapped the little tab thing off and lock it with the boot lock (dog ate the remote)

Just need some benny hill music in the back ground lol

sorry for jumping in, ive got a hlm ecu for sale

there's not many you can do apart from control arms and gear box mount unless you can get ones made up for your subframe.

remember its not a race lol, i think you'll have fun whatever

Nice!!!

check the codes if you can

mtec brakes .co.UK there the dealers, you have to wait a couple of days for them but so far pretty pleased, went with dimpled and grooved but they are noisy

possibly, there very wide so doesn't look like they'll fit under the titans, gonna try my propus wheels.

gonna see if i can get these to fit
http://i1196.photobucket.com/albums/aa404/dant5r1/20120518_175729.jpg

that sucks mate

how it sits now
http://i1196.photobucket.com/albums/aa404/dant5r1/20120518_185604.jpg

http://i1196.photobucket.com/albums/aa404/dant5r1/20120516_150011.jpg
http://i1196.photobucket.com/albums/aa404/dant5r1/20120516_144208.jpg