Are you certain it's not a wheel bearing on the way out? Certainly fits with the symptoms of being worse when cornering one way... can't quite see what else it might be.
Type: Posts; User: ajma; Keyword(s):
Are you certain it's not a wheel bearing on the way out? Certainly fits with the symptoms of being worse when cornering one way... can't quite see what else it might be.
I hate pheasants for this - they seem to know exactly where to go to get hit, and are so heavy that they do a lot of damage. I lost one of my black grilles in the same way - was fortunate that it...
I had this problem on my 850 a few years ago and had the same thing with my s70 a few weeks ago.
In both cases, a 4lb club hammer provided nowhere near enough impact to get the shaft moving - I...
Maybe you've already done this, but having just replaced both front reluctor rings I strongly suggest a stout 3/4" breaker bar and socket for undoing the hub nut; one of mine came off relatively easy...
I have a leak something like that too... nothing obvious / visible except the heatshield above the exhaust gathers coolant over time or after a hard run and the lower part of the brake servo looks...
Is this club exclusive to undertakers, or can those of us with S70 2.5T's join too? :-)
The oil cap slowly leaking oil may well be sign of the engine breathers being clogged up which is very common. You should check the dipstick tube while the engine is running to see if excess...
It works on the Motronic 4.4 engines (mine's a '98 2.5 LPT and it works fine). I've also used it successfully on an Accord too.
I got a nice cheap one from Ebay and am just using the free...
You'll need the new inlet manifold gasket as you say. For a good price on all the bits required PM Rufe on this forum who offers excellent service (FRF Volvo in Swansea).
If you search for PCV...
While cleaning up the ABS stuff, be sure to check the reluctor rings VERY carefully for cracks. Rust tends to build up underneath them and eventually they let go, causing an ABS fault.
Surely that was on a P1 car though? I replaced my '98 S70 matrix and it was, as you say, not a bad job really (trying to dry up the previously leaked coolant was a different story :-( .
I'd read...