That’s the one .I would say your pc would be 32 bit.
Type: Posts; User: antonys60r; Keyword(s):
That’s the one .I would say your pc would be 32 bit.
Jon it sounds like your Vida is out of date. There is a patch that you can download and this changes the date of expiry. All details of this are on the Volvo owners club forum.
I'm pleased Jon your finally getting your R to somewhere near where you want it.
Your exhaust is very tempting !
I'm fairly close to Bedford and can read the codes for you
I order my 3 fluids and haldex filter from frf volvo in Swansea . Use code c3 for a good discount.
Quick delivery as well.
Hi Jon . All the fluids have to be pumped out as there are no separate drain plugs. I use a hand pump to empty and refill but a mityvac would be easier. You can replace all fluids and the haldex...
Hi Jon pressing it once reduces the system, pressing it 5 times turns it off. Even when you turn it off I don't think it's completely turned off though. Volvo safety again. If it only cuts in on...
Dstc stands for Dynamic stability traction control. It's more than just traction control. There is a yaw sensor underneath the drivers seat. If you want to turn it off press the dstc button 5...
Your current hu803 can be repaired. There are a couple of firms online that repair them.
The hu803 has no security code as such but it is programmed to the car it is fitted in. It will need programming to the car by volvo or an Indy with vida software update capability.
I'm hoping my pump is ok . I replace my haldex oil and filter every 2 years and there is plenty of pressure looking at the live readings . Also inside the dem was dry with no evidence of water...
I've been having anti skid service required coming up on the dim on and off for the last few months.
The code was 007b oil pressure incorrect value on Vida.
I would reset it and it would be fine...
A new valve body is about £460 plus labour to fit unless you can fit it yourself .
Sounds like valve body issues. Early 6 speed autos suffer with this. Worth repairing though.
Excellent news. That's the best way to go while is at it Tim will set the cam timing as well. I'm pleased your happy with the way the car is running for now , I'm pleased it turned out to be can...
The best thing is to pm on here as well as t5d5 and just wait for him to reply . He is extremely busy but he will get back to you.
I told you this when you came over hence why I have fitted a boost gauge and my R is completely standard. It's unlikely to split a liner standard but it's not unheard of. If you get yours reapped...
The maf was reading 12.4 kg/h. We couldn't clean the maf at mine as Jon was pushed for time and I didn't want to damage the security torx bolts trying to rush.
The maf parameters at idle warm engine a.c. off are 12 and 20kg/h. The maf is just within limits . This was before it was cleaned and with a dirty air filter. Now Jon has his Vida up and running...
Jon replied to your email
I Think it's the pro version. I know it has to be xp pro, So I would think it's win 7 pro.
The later versions do . I think it's 2014d and on work on win 7
My laptop for Vida runs on xp . I had to completely wipe it and reinstall xp. After that Vida installed perfectly 1st time . If anything is not spot on then Vida won't install.
That's exactly what I did regards the laptop. Vida can be a little fussy with the install. V8 in the griff now that's an engine . Can't beat the sound of a v8 !
Vida is not too bad to use. It's quite logical really . As lee said and I said to you when you came round. No updates on the laptop after Vida is installed and you'll be fine. The laptop I use is...