Search:

ill add a standalone wideband that will soon tell me

cheers it was fine on the std 15g so thought id had a 16g but into the stock 15g houseing , yep still in the bug,(ps its manual) , running 12.6 last time it was out ,also r32 t 4wd caddys running...

std t5 2.3 engine
16t turbo
rica remap ecu
34lb 3bar,v70 white injectors
decated
1.3bar
is this ok? starts fine but unsure ,if its safe in boost?

all that room u have there ,,, and there me trying force induction from a rwd t5 bug ,, but afer some ideas , i came up with a big side mount intercooler.electric side scoop and forced induction ,,...

thanks but belive it or not its now quiter then a standard t5 ,,,modifyed a golf mk5 r32 3.2v6 rear silencer box ,, so now i can hear for noises instead of feeling deaf lol , i think i still pref the...

these plenty pf room in the rear of the bug i evern removed the rear and side windows for leverage , and dam things snapped , so was easyer and cheeper to pop another lump in all nicely back and...

dam head bolts ,im worryed that if i try pull any harder i may snap as there bending/twisting in the block, and as it alloys ,ive know bolts shear off when re torqueing the head ,,the reason im...

looking bang on this pal ,u really ought to add to the caddy forium ,as they have been talking about it ,ps do u know who well these go ,,,trust me thers going to be defo,,,rear rubber burning with...

i can see us haveing some power caddy fun ,if ur up for a laugh at york or santa pod,,volvo t5 caddy vs mk4 4motion caddy ,,,,,looking bang on pal ,,,keep the updates flowing,,

im nr doncaster if it applys have a t5 lump ,thow its in a bug...lol,,dose that count

i agree pete but surely 180pound is too mutch ud think it would rip the block therds out

IM STRESSED lol i snapped my torque wench at 180pound i knew somert was going to break ,how the hell im gunna get these out is another story ,and you watch ,hg will probley be fine,,,but its on my...

meant to say as the car defo..seems under powered ,and the engine has a slight unevern wobble just over idiol but dosent miss ,,,,i thought ill remove the head,and i carnt un do the head bolts ,the...

it take a fair while to get warm ,so after fitting the thermostate 2day ,fan cuts in and out as it should ,and no signs of over heating ,but as it was on my mind i thought chuff it ,might as well...

lol im just refit/building all the extra bits ,lights,grills,plates,bonet seal etc ...

hi pal yes ill go buy one may come in for another engine,, if i stuck the tube into the header how do i seal it/as when the engine water heats expantion starts so the water in theroy will flow out of...

furthur checking 2day ,ive been advised to not run without a thermost,,,,chap says causes blow back at high speeds,erm never heard of this b4 ,,,i have noticed the drop in pulling power evern thow...

hi all ive only really noticed this yesterday ,as im sure it didnt do this b4,,and the engines seems to have lost its little turbo sting as well ,,all 5 clyinders are runing but when i slighty lift...

wickid project lol i shoved one of these in the rear of a type1 bettle lol scary 300bhp,manual runing 1.2 bar of boost,rwd
and my next project is on a similar basis to yours ,only im fitting a r32...

hi russ i knew ud get there and facts are i know ull break a 600bhp engine ,a in sweden them mad nutters are runing 750bhp thew std t5 gearboxs ,,so theres room for improvement ,that t5 the best ive...

im havin a simlar clutch probs too,,,im getting stiff gear changers,and it has free play bit like when a engine mount fails,(i.e when uput the car in gear u can rock the car a good 3inch b4 the...

i have a 94 850 t5 2.3 and ill get the ecu number for this time 2morrow if it helps ,ps just remember if ur t5 has aircon ull well also need a ecu with aircon modual ,otherwise i was told ur aircon...

checked fuel pressure 2day and shows 32psi with igition on
http://i15.tinypic.com/35c1m2o.jpg
and when i rev engine it rises in fuel pressure any ideas /or shud it rise in pressure,
mmm jet...

hi adam ive not fitted the new fuel yet ,still useing the std t5 pump ,and fitted a big inline fuel filter as i did find bits of rust in the tops off the injectors?(will a s70 t5 fuel rail fit/same ...

all pipe boost and vac pipes are fine /tryed coil good idea,but hasnt changed mutch so im after a set of injectors or fuel rail to try? ive noticed that it trys to pull thew the rev range with it...