I will get round to this shortly I promise ha ha
Type: Posts; User: thad1; Keyword(s):
I will get round to this shortly I promise ha ha
ha ha we shall see!
Ran out of time today lol
I think the amp is good but it deffo has a sweet spot, once you go over it you can hear it clipping. What makes the drivers flap around is the clipping from the amp. The subs are rated 160 Watts rms,...
Probably not, having said that most amps are 2 ohm stable now!
Also the Dynaudio are known to be power hungry little blighters and I reckon to drive them properly you need at least 100 Watts RMS a corner!
I have a 2 channel amp that kicks out 100 Watts RMS a...
Well to be honest I was curious about how the speakers are wired to the amp in terms of whether it's 4 or 8 ohms.
When I crank mine right up I get a bit of distortion, this I think is due to the...
Just thinking out loud here lol
Is the Alpine amp fitted to the C70's 2 ohm stable?
Also I have read it is 4 ohm load a channel which is fine but I know the midrange speakers in the front are...
I agree about the handling, I never had a front wheel drive car before and it all feels a bit weird, lift off oversteer feels like its always looming at high speed, I prefer power oversteer at least...
Black me thinks....................................................I have garnet (gay) red lol
Have you fitted them yet mate?
I am keen to see what you think as my C70 is deffo not one of the finest handling cars I have ever driven ha ha
I might need a set for mine I think!
I am new to Volvo's, well I have had my C70 T5 for just a year now. I am going to service it shortly with plugs filter oil etc
I have read a lot about spark plugs and the problems they may cause,...
ha ha ha v funny!
Sounds brilliant with the Dynaudio though!
I bought the headunit off ebay for £50, it has a 7 band equalizer, plays mp3 off a hard drive and will rig up to an ipod (if your into crapple products that is) its also got 3 5 volt pre outs as...
I think the answer is yes for the back as the convertible has no rear shelf to mount them in!
I think all C70's have the 10 speakers, so you have 4 8 inch subs (2 front and 2 back) some had the surround sound option but from what I understand the center speaker was the dolby upgrade. I don't...
I think my coupe has 2 x 9 inch in the rear shelf, I am not sure whats in the doors though, i thought there were 9 inch subs in the bottom on the front doors!
I still think the bass is good, it's...
To be honest the Dynaudio are very good a bass considering their size!
I have a Pioneer headunit with various high/low pass filters etc so filter the 50hz bass out so as to not kill the bass...
Only in the C70, if you get in the boot and remove the boot carpet on the back of the rear seats you will see the holes, I think they are 10inch!
I discovered 2 large holes in the rear of the C70 behind the rear seats the other day!
Apparently there was a 10 inch sub upgrade option for the C70, anyway has anyone mounted a pair of subs in...
ha ha I didn't know unipart even mad pad's.............that's scary!
I think Pagid, Mintex standard replacement pad's are not up to much but if you try the M1144 or M1155 mintex they are very...
I have seen this app for android phones and also up and running on youtube on various cars.
It displays all the data the ECU can access apparently, things like IAT, Ignition advance, boost...
I have been trying to diagnose low boost condition on the C70. Anyway to cut a long story short I fitted a bleed valve to see if the Boost control solenoid was the cause of the problem, guess what?...
I replaced my front disks and pads from GSF, the disks were zimmerman and are the same as standard fit Porsche ones! I used the premium pads and to be honest they are really really good, the pads...
o.k cool, what size internal bore silicone tube did you use to connect it to the gauge?
I was thinking about doing the whole car like this and just using cable ties to hold the vacuum pipes on!
I fekin love this idea!!
I got a boost gauge here, just debating where to put it. Also I was thinking about using nylon tubing with a 3mm bore and silicone vacuum hose to do the joins, what do we...