i'm thinking of a paddle clutch as well Russ, once the Perils back on the road perhaps i can take her a little spin round the block to see what the clutch is like :biggrin: (pretty please lol)
Printable View
Quick update, I have a turbo! :D I've got a K24 ;)
Next problem, I need a 1999> C70 downpipe, anybody know to one? or, http://cgi.ebay.com/ebaymotors/Volvo...Q5fAccessories should I get one of these?
Ask Rnash2002 what he did, i know he's got a kkk24 and i saw it pull 14.03 at avon so it's working well:D
Yes mate, got a set of blues for her, and a Walbro pump
Does anybody know where or the part number for some ARP head stud/bolts?
I've been reading on VS, everybody seems to use N/A throttle body, am I being thick here, do they mean the 2.5 5 pot one, or the one off the 960 3.0
I can see the N/A one is bigger, and if it is the 2.5 5 pot one, easier to get hold of, and the TPS sensor looks like its in the same place.
Anybody know how big the ports are on a standard T5 head? I have a ported one, I wanted to know how much has been removed
Well, that is good new, took my ported head to the machine shop for a check, its warped by 14 thou! or more technically known as F****d! I'm none too impressed.
I'm hoping now my Piper cams really 'are' piper cams
What resistance are the injectors on the T5's? I've got a set of blue's for mine, now I'm being informed I should use bigger.I missed a set of green's the other day, now looking at other makes (Siemens) or Bosch off other cars.
Any help will be grateful
here's a pic of both pre-ME7 & ME7 gaskets if that helps, i've got them here but not got a measure handy to give you sizes
http://www.imagechicken.com/uploads/...3005748500.jpg
according to this LINK, the injector resistance should be 15.6-16.2 ohms. Read something about using Vauxhall/Holden injectors (VXR blue 470cc 280156280 Bosch) but not looked that far into it myself
I've been looking on the turbo-tuner website, no mention of anything there, unless i missed it! I wonder if it bothers the TT ecu, as it seems to be able to run most injectors?
send Adam an email asking, he's been very helpful & i still haven't even bought one yet
think some have had problems because they've gone too big with the injectors & can't get the injector duty low enough to idle correctly, but thats nothing to do with the inector resistance
The car has gone to the garage yesterday, hopefully will be making a start it her next week! :D
Been up the garage today, the front end is stripped off, most of the wiring, hopefully will have the engine and 'box out tomorrow :)
Is there any difference between T5 driveshafts and N/A ones? I'm sure told Lee told me that the T5 ones were thicker, and mine had normal ones fitted.